I am confused again..... Take a look - Page 2

03chevy · 07-02-2008, 05:45 AM

no matter how you look at it if you put 4 knuckles on a truck then it will be 4 wheel steer. just my 2 cents

junior3382 · 07-02-2008, 10:42 AM

I have seen a few of these small trucks with 4wheel steering, but I have looked hard at the second picture, and have been trying to find the original site I found them on. I still see it in the first picture, but not in the second one. Oh well, a mystery I guess. Not my trcuk so it is not my concern.

And thanks 75, That cleared some things up. I just had never seen that until the other day. BUt y'all know me, sometimes I will get hung up on completely unneeded information....LMAO... anyways, I agree, the straight axle would aloow for a higher lift, and does perform better off road, I just always like learning something new.

tjzz4 · 07-02-2008, 11:27 AM

I think you are looking at the right front and left rear tire... The front tire being turned hard right gives the illiusion the rear tire is turned... Looks straight to me.

junior3382 · 07-02-2008, 11:36 AM

Well I agree, it is point of view. I have spent the last hour going through my entire history and searching for where I got these pictures originally to see if I could get more. BUt I am at a loss. I am sure over the next few weeks I will stumble across it again, and if so I will let y'all know. For now I am sticking to POV for the rear wheels.

As for the subject at hand, was it only the Jeep's that have CV's shafts in their straight axles?

mudseeker · 07-02-2008, 12:16 PM

Quote:

Originally Posted by tjzz4

I think you are looking at the right front and left rear tire... The front tire being turned hard right gives the illiusion the rear tire is turned... Looks straight to me.

we have a winner! it is a very confusing pic though.

junior3382 · 07-03-2008, 09:19 PM

Okay, I said I would post back when I found the original site where I got these pics. It took me a few days, but it turns out that I got it from Cardomain. Geez, I should have checked there first....LOL....

Here is a shot of the rear axle... as you can see, there is not rear steering. It was bothering me so I had to see for sure... Hmmmm now i can sleep tonight....LOL....

And here is a link the guys page.... Lots of extras....
This page is for my 1996 SFA ZR2 and my wifes BDS BlaZeR2 - Terre Haute, Indiana

The front axle came from a Grand Cherokee......

Figured you all would wanna see.

87c10slammer · 07-04-2008, 07:02 PM

my bad sorry for makin you lose sleep

junior3382 · 07-04-2008, 07:20 PM

no worries mate.... I saw what you saw, what made me lose sleep was that I could not for the life of me remember where I got the pics from in the first place, and I usually have a good memory for those kinds of things. Besides, I am glad I did, I forgot he has a complete parts list for the swap, which I know I will be able to take advantage of in the future...... LOL...

But anyways........................

07-02-2008, 05:45 AM	#11 (permalink)
03chevy Senior Member Join Date: Dec 2006 Location: jax,fl Posts: 812	no matter how you look at it if you put 4 knuckles on a truck then it will be 4 wheel steer. just my 2 cents __________________ A dirty mind is a terrible thing to waste!

07-02-2008, 10:42 AM	#12 (permalink)
junior3382 Senior Member Join Date: Mar 2007 Location: I live in south central PA, but grew up in Maine Posts: 2,153	I have seen a few of these small trucks with 4wheel steering, but I have looked hard at the second picture, and have been trying to find the original site I found them on. I still see it in the first picture, but not in the second one. Oh well, a mystery I guess. Not my trcuk so it is not my concern. And thanks 75, That cleared some things up. I just had never seen that until the other day. BUt y'all know me, sometimes I will get hung up on completely unneeded information....LMAO... anyways, I agree, the straight axle would aloow for a higher lift, and does perform better off road, I just always like learning something new. __________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift 31x10.50 Liberator A/T's

07-02-2008, 11:36 AM	#14 (permalink)
junior3382 Senior Member Join Date: Mar 2007 Location: I live in south central PA, but grew up in Maine Posts: 2,153	Well I agree, it is point of view. I have spent the last hour going through my entire history and searching for where I got these pictures originally to see if I could get more. BUt I am at a loss. I am sure over the next few weeks I will stumble across it again, and if so I will let y'all know. For now I am sticking to POV for the rear wheels. As for the subject at hand, was it only the Jeep's that have CV's shafts in their straight axles? __________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift 31x10.50 Liberator A/T's

07-03-2008, 09:19 PM	#16 (permalink)
junior3382 Senior Member Join Date: Mar 2007 Location: I live in south central PA, but grew up in Maine Posts: 2,153	Okay, I said I would post back when I found the original site where I got these pics. It took me a few days, but it turns out that I got it from Cardomain. Geez, I should have checked there first....LOL.... Here is a shot of the rear axle... as you can see, there is not rear steering. It was bothering me so I had to see for sure... Hmmmm now i can sleep tonight....LOL.... And here is a link the guys page.... Lots of extras.... This page is for my 1996 SFA ZR2 and my wifes BDS BlaZeR2 - Terre Haute, Indiana The front axle came from a Grand Cherokee...... Figured you all would wanna see. __________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift 31x10.50 Liberator A/T's

07-04-2008, 07:02 PM	#17 (permalink)
87c10slammer Senior Member Join Date: Mar 2008 Location: levittown pa Posts: 607	my bad sorry for makin you lose sleep __________________ HONDAS ARE LIKE ******! EVERY ONE HAS ONE 87 C10 SLAMMEd 400+hp 383 almost done. 00 GMC JIMMY wifes truck but my other toy**

07-02-2008, 11:27 AM	#13 (permalink)
tjzz4 Senior Member Join Date: Oct 2007 Posts: 191	I think you are looking at the right front and left rear tire... The front tire being turned hard right gives the illiusion the rear tire is turned... Looks straight to me.

07-04-2008, 07:20 PM	#18 (permalink)
junior3382 Senior Member Join Date: Mar 2007 Location: I live in south central PA, but grew up in Maine Posts: 2,153	no worries mate.... I saw what you saw, what made me lose sleep was that I could not for the life of me remember where I got the pics from in the first place, and I usually have a good memory for those kinds of things. Besides, I am glad I did, I forgot he has a complete parts list for the swap, which I know I will be able to take advantage of in the future...... LOL... But anyways........................ __________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift 31x10.50 Liberator A/T's

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Very confused on 5th wheel hitch wiring	agraup	Chevy Truck Forum	9	03-21-2008 06:17 PM
Confused. What happened?	greasemonkey	Forum Help	6	09-21-2007 04:25 PM