NP 205 Twinstick Question

Catskinner · 10-04-2009, 05:29 PM

Hello everyone, I am new to the forum so bear with me if I ask something you allready answered. I have a 77 K-10 with a 4sp and Np205 transfer case. I was thinking of putting in a twin stick from offroad design and wondered if you could do it without removing the transfercase. I don't really need the front axle only drive capability so I don't need to pull the shift rail and grind it. Have any of you guys-gals done a twin stick like this?Thanks, I am looking foreward to some great info.

Lonesome7.3 · 10-28-2009, 04:58 PM

Have you contacted ORD to ask them? I have seen a few different twin stick set ups on the market and for the most part you are only dealing with the linkage. I have been seriously considering this mod for one of my projects but cannot justify the expense when I can easily make one. Give them a call and see what they have to say.

chevyguy · 11-07-2009, 04:28 PM

Trasnfer case has to come out for a twinstick conversion on a 205.

Towtruck · 12-04-2009, 11:58 AM

There is a website www.broncograveyard.com wich sells this conversion. Moderatly priced to. it is under 78-79 full size secion on the left hand side of the page.

10-04-2009, 05:29 PM	#1
Catskinner Junior Member Join Date: Oct 2009 Location: Simpsonville, S.C. Posts: 1	NP 205 Twinstick Question Hello everyone, I am new to the forum so bear with me if I ask something you allready answered. I have a 77 K-10 with a 4sp and Np205 transfer case. I was thinking of putting in a twin stick from offroad design and wondered if you could do it without removing the transfercase. I don't really need the front axle only drive capability so I don't need to pull the shift rail and grind it. Have any of you guys-gals done a twin stick like this?Thanks, I am looking foreward to some great info. Last edited by bradrhale; 10-04-2009 at 06:05 PM. Reason: no advertising other related forums

10-28-2009, 04:58 PM	#2
Lonesome7.3 Senior Member Join Date: Jul 2008 Location: Columbus GA Posts: 2,464	Have you contacted ORD to ask them? I have seen a few different twin stick set ups on the market and for the most part you are only dealing with the linkage. I have been seriously considering this mod for one of my projects but cannot justify the expense when I can easily make one. Give them a call and see what they have to say. __________________

11-07-2009, 04:28 PM	#3
chevyguy Senior Member Join Date: Sep 2005 Location: ALABAMA Posts: 3,555	Trasnfer case has to come out for a twinstick conversion on a 205. __________________ Some people are like slinkies, Basically useless, But fun to watch when you push them down the stairs.

12-04-2009, 11:58 AM	#4
Towtruck Senior Member Join Date: Aug 2009 Location: Ft.liqourdale, FL. Posts: 101	There is a website www.broncograveyard.com wich sells this conversion. Moderatly priced to. it is under 78-79 full size secion on the left hand side of the page. __________________ ASHES TO ASHES, DUST TO DUST, IF IT WEREN'T FOR CHEVY'S MY TOOLS WOULD RUST

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New question. Heater/Ac question 1986 chevy k10 pickup	ChevyLearner	Chevy Truck Forum	11	08-18-2009 11:04 AM