| | |
| |||||||
 | Toyota Truck Forum - Toyota pickup truck forum, etc. |
| | LinkBack | Thread Tools | Search this Thread |
02-27-2008, 12:11 PM
| #1 |
| Junior Member Join Date: Feb 2008
Posts: 8
 | Vibration / clicking noise 2000 4runner, 2wd, 4 cyl., (A/T) Sometimes I can hear a metalic clicking ("click... click,click,click") when starting to move in reverse and drive. Sounds like it might be coming from the rear but it's hard to pin point. While driving, there is a strong vibration. I can feel this in my feet, and through the gear shifter (A/T). This vibration happens at all speeds, all RPMs as long as the accelerator is depressed. The moment I take my foot off the gas and let the vehicle coast the vibration stops. The moment I apply gas the vibration starts. When the truck is in Neutral (no matter the RPM) no vibration occurs. No vibration when in PARK and any RPM. I'm looking for possibilies before I start replacing the u-joints and other things to check while replacing u-joints. Thank you for stopping in. |
|  |
|
02-29-2008, 03:42 PM
| #2 |
| Senior Member  Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania.
Posts: 2,970
 | Sounds to me like you need a universal joint bud. And from the consitancy of the noise, i would not wait to long. if it gives, and you drop the drive shaft, you will be looking at much much more parts to replace. U-joints are realitively inexpensive and easy to install.
__________________ Lets get some mud on the tires...eh?!?!?    OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6  1998 Mazda B3000 SE 4WD 3.0L V6 3" lift  31x10.50 Liberator A/T's |
|
| |
|
03-13-2008, 04:57 PM
| #3 |
| Senior Member  Join Date: Sep 2004 Location: Sac-Town, Cali
Posts: 1,585
| Sounds like a Ujoint to me. Also sounds like an unbalanced driveshaft. Have you been offroading or driving somewhere where you may have dented your driveshaft?
__________________ '93 Isuzu Amigo, Toyota Axles/Tcase/Drivelines, 35" MTR's '01 Pathfinder, making a huge effort to keep it stock, since it's my DD |
|
| |
|
03-13-2008, 06:37 PM
| #4 |
| Senior Member Join Date: Mar 2007 Location: Buffalo Ny
Posts: 620
| yeah thats got u-joint all over it..
__________________ Joe 89 K2500 Chevy, Wee-Oh-five 285K miles, completly rebuilt needs a motor, bad 1962 IHC Scout All Wheel Drive (Scout speak for locking axles) 152 ci, dana everything else |
|
| |
|
05-05-2008, 10:08 PM
| #5 | |
| Full Member Join Date: Mar 2008
Posts: 48
| Quote:
| |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1994 c1500 - clicking noise from heater | Chris | Chevy Truck Forum | 17 | 09-07-2008 07:15 PM |
| Vibration/Buzzing Noise on Acceleration | az1500 | GMC Truck Forum | 2 | 02-23-2008 04:58 PM |
| clicking noise | scc457 | Chevy Truck Forum | 8 | 12-20-2007 08:59 PM |
| Clicking sound under driver's side console | nnunez | Chevy Truck Forum | 3 | 03-31-2007 07:24 AM |
| 85 silverado clicking when key turned!! | mntman | Chevy Truck Forum | 3 | 03-02-2006 07:59 PM |
