Changing gear ratio

rred4708 · 06-01-2008, 07:01 PM

How hard would it be to reduce my gear ratio to get better fuel mileage, I dont offroad and so I dont really need such a low gear ratio as I have. I have a 2005 Dodge Ram 3500 dually quad cab and mostly use it to pull my boat

stumpuller454 · 06-01-2008, 07:41 PM

wouldn`t be that hard but would be expensive, gears from dodge last time i did a one tone was 1400 for ring and pinion only, buy a chip instead!! and exhaust, still cheaper...

03chevy · 06-02-2008, 07:32 AM

get a bully dog system and change the exhaust and you will be good to go

Chevy_Finatic79 · 06-02-2008, 09:26 AM

$1400 for ring and pinion???????????? man with prices like that I cant afford to drive anything but a Chevy

bradrhale · 06-02-2008, 11:59 AM

1400 sounds kinda pricey. i can get a ring and pinion from peterbuilt for 750. and its alot bigger. plus that again for labor, ...... something is messed up here.

stumpuller454 · 06-03-2008, 08:20 AM

coulda been ripped off, at the time stuff was NEW so you know how things are way over inflated when they first come out, could be cheaper now i dunno, that was Retail too, not what we paid (:, plus stuff in canada is way freakin more expensive than US, we still don`t know why (:

75K30 · 06-03-2008, 09:40 AM

How much of a change is the OP intending to change, and how much of an increase does the OP expect to gain from a dually?
Rolling resistance alone is a big factor here. Getting that big ol truck rolling is difficult enough.
Given the cost, how many miles is it going to take to offset the cost of a gear change? Could be years before the OP can realize a cost savings.
Does not make financial sense to me.

MORROWMUDDER · 06-27-2008, 08:33 PM

is it a 4x4? im pretty sure if you change the rear gear ratio you have to change the front so they match or really bad things can happen when you engage the 4x4!! there are other ways of getting better fuel mileage. i'd do some research, exhaust, intake, ignition, and a tuner help alot. and for 1,400 bucks that will about cover all i suggested!!

06-01-2008, 07:01 PM	#1
rred4708 Junior Member Join Date: Jun 2008 Posts: 5	Changing gear ratio How hard would it be to reduce my gear ratio to get better fuel mileage, I dont offroad and so I dont really need such a low gear ratio as I have. I have a 2005 Dodge Ram 3500 dually quad cab and mostly use it to pull my boat

06-02-2008, 07:32 AM	#3
03chevy Senior Member Join Date: Dec 2006 Location: jax,fl Posts: 991	get a bully dog system and change the exhaust and you will be good to go __________________ A dirty mind is a terrible thing to waste!

06-02-2008, 09:26 AM	#4
Chevy_Finatic79 Senior Member Join Date: Mar 2008 Location: Lincoln NE Posts: 439	$1400 for ring and pinion???????????? man with prices like that I cant afford to drive anything but a Chevy __________________ "She's gonna Freak when she see's my wheels" 85' Chevy C-10 Longbox (Rat) TBI 5.7 Liter/THM350 90' Chevy Suburban 4x4 TBI 350 Cu.In./700R4 http://www.truckforum.org/forums/truck-pictures-176.htm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gear Ratio	brad4eva	Chevy Truck Forum	10	05-11-2008 11:32 AM
Likely gear ratio?	436'd skylark	Chevy Truck Forum	13	12-19-2007 03:17 PM
Changing Gear Ratio in a One Ton	Super Step	GMC Truck Forum	7	09-21-2007 03:53 PM
Gear Ratio??? What If????	Maverick	Chevy Truck Forum	11	07-27-2006 09:58 PM
Gear Ratio???	Billy2001Z71	Chevy Truck Forum	4	06-19-2005 02:27 PM

06-01-2008, 07:41 PM	#2
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 783	wouldn`t be that hard but would be expensive, gears from dodge last time i did a one tone was 1400 for ring and pinion only, buy a chip instead!! and exhaust, still cheaper...

06-02-2008, 11:59 AM	#5
bradrhale Moderator Join Date: Apr 2006 Location: Texas Posts: 2,772	1400 sounds kinda pricey. i can get a ring and pinion from peterbuilt for 750. and its alot bigger. plus that again for labor, ...... something is messed up here.

06-03-2008, 08:20 AM	#6
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 783	coulda been ripped off, at the time stuff was NEW so you know how things are way over inflated when they first come out, could be cheaper now i dunno, that was Retail too, not what we paid (:, plus stuff in canada is way freakin more expensive than US, we still don`t know why (:

06-03-2008, 09:40 AM	#7
75K30 Senior Member Join Date: Jul 2006 Posts: 2,515	How much of a change is the OP intending to change, and how much of an increase does the OP expect to gain from a dually? Rolling resistance alone is a big factor here. Getting that big ol truck rolling is difficult enough. Given the cost, how many miles is it going to take to offset the cost of a gear change? Could be years before the OP can realize a cost savings. Does not make financial sense to me.

06-27-2008, 08:33 PM	#8
MORROWMUDDER Senior Member Join Date: Mar 2007 Location: Ohio/Montana Posts: 114	is it a 4x4? im pretty sure if you change the rear gear ratio you have to change the front so they match or really bad things can happen when you engage the 4x4!! there are other ways of getting better fuel mileage. i'd do some research, exhaust, intake, ignition, and a tuner help alot. and for 1,400 bucks that will about cover all i suggested!!