| | |
| |||||||
 | Ford Truck Forum - Enthusiasts can discuss ford trucks, accessories, etc. |
| | LinkBack | Thread Tools | Search this Thread |
06-11-2008, 09:04 AM
| #1 |
| Senior Member  Join Date: Jan 2008 Location: Southwest Virginia
Posts: 112
 | 351 freeze plugs I got one freeze plug that just wont stay in, I've replaced it numerous of times and still it pops out. Can I put JB Weld around it and weld it in place or is that just stupid? |
|  |
|
06-11-2008, 11:55 AM
| #2 |
| Senior Member Join Date: Oct 2007
Posts: 212
 | There are a couple options out there for a freeze plug that you tighten a screw on to expand it in the hole. |
|
| |
|
06-11-2008, 12:04 PM
| #3 |
| Senior Member Join Date: Jan 2008 Location: Southwest Virginia
Posts: 112
| I tried it and still pops out |
|
| |
|
06-11-2008, 01:24 PM
| #4 |
| Senior Member Join Date: Oct 2007
Posts: 212
| I couldn`t find them but ford had a recall on the taurus in the late 90`s and they installed a freeze plug that had an '0' ring on it that can`t come out.. the freeze plug looked like a block heater without the element. |
|
| |
|
06-12-2008, 04:24 PM
| #5 |
| Senior Member  Join Date: Mar 2008 Location: Lincoln NE
Posts: 439
| I know when I get a lot of play or a loose fit on some part that is supossed to be pressed in I take a punch and go all the way around the inside diameter and tap it. what it does is kinda distort the surface and make it "grab" the "freeze plug" in this case. I usually have to use this trick with ballbearings and races on motorcycle parts. you could also try it with the freeze plug itself and "tap" it out so it fits way tighter in the hole. just and Idea but do what you must to get the truck back on the road
__________________ "She's gonna Freak when she see's my wheels" 85' Chevy C-10 Longbox (Rat) TBI 5.7 Liter/THM350 90' Chevy Suburban 4x4 TBI 350 Cu.In./700R4  http://www.truckforum.org/forums/truck-pictures-176.htm |
|
| |
|
06-13-2008, 12:09 AM
| #6 |
| Senior Member Join Date: Jan 2008 Location: Southwest Virginia
Posts: 112
| i finally got fed up with it and took it to my mechanic, wont be long til he gets it fixed and i can drive her round town, once i get a good pic i learn how to put it up on here and show her off |
|
| |
|
06-13-2008, 08:50 AM
| #7 |
| Senior Moderator  Join Date: Apr 2005 Location: Cali-4 Nye-Aye?
Posts: 1,178
| You'll have to let us know what he does to get it to work. I am glad you didn't go with the JB weld, that would have ruined the block if something ever happened and you had to replace that plug.
__________________ MEOW!! |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Freeze Plugs | mxer201 | Mazda Truck Forum | 8 | 03-15-2008 08:53 PM |
| brakes freeze | ksbs2007 | Ford Truck Forum | 8 | 02-14-2008 12:01 AM |
| How do you drain the anti-freeze 95 K-1500 | larbec7 | Chevy Truck Forum | 10 | 01-30-2008 11:02 PM |
| defrost smells like anti-freeze | gustofson | Ford Truck Forum | 4 | 01-19-2007 10:27 AM |
| Anti freeze leak none on ground | 92Jag | Chevy Truck Forum | 29 | 10-16-2005 10:16 PM |
