| | |
| |||||||
 | Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
11-14-2007, 03:31 PM
| #1 |
| Junior Member Join Date: Nov 2007
Posts: 1
 | grinding noise help I have a 94 z-71 p-up.When pulling out from stop there is a quick grinding noise from under truck at about 15mph then it sounds like it is in 4wheel, then grinds again at about 25-30mph no longer sounds like it is in 4wheel, and is fine until I come to a stop and the process starts all over. Does not do it in 4wheel.Thought it was the front diff trying to engage.Disconnected power to front diff solenoid no grind in 4wheel, but still grinds in 2wheel.Now thinking transfer case. Anybody here of this problem? |
|  |
|
11-14-2007, 05:04 PM
| #2 |
| Junior Member  Join Date: Oct 2007
Posts: 8
| It is possilble to have a weak motor that engages the front axle. It could be stuck partially in four wheel or just kinda bouncing back and forth. |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1999 s10 zr2 grinding noise, help | nordy | Chevy Truck Forum | 3 | 11-05-2007 04:35 PM |
| Grinding Noise? | TrucksNBeer | GMC Truck Forum | 1 | 12-18-2006 02:01 PM |
| Grinding noise from transmission | 92Jag | Chevy Truck Forum | 5 | 12-04-2006 10:14 PM |
| Grinding noises | Big Jim | Chevy Truck Forum | 2 | 01-29-2006 10:48 AM |
| 4x4 auto engaging/grinding | skitzotic | GMC Truck Forum | 1 | 12-04-2005 10:48 AM |
