| | |
| |||||||
 | Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
04-25-2008, 09:19 PM
| #1 |
| Junior Member Join Date: Apr 2008
Posts: 2
 | what rear end? I picked up a rear end at a junk yard for a project and was told it was a dana spicer 60 out of an 05 chevy express srw van. Problem is it has a 12 bolt hole cover but is shaped like a 60 it has a 10.5 inch ring gear with 14 bolts holding it onto the standard style carier. It has been trussed so I cant read any of the bom numbers and none of the casting numbers or numbers on the cover come up on dana's Expert site. The cover is stamped with the dana logo however. Any ideas??? has dana or maybe GM come out with a new design that isn't showing up on there parts sites yet? The rear end is like brand new none of the gears show any wear whatsoever. Thanks Eric |
|  |
|
04-25-2008, 10:40 PM
| #2 |
| Senior Member  Join Date: Jul 2006
Posts: 2,627
 | Welcome to the site; Have you pulled an axle yet to coun the splines? I am really not sure of the dana spicer logo you are reading on the cover. I am also aware of Express axles having additional bracing from the manufacturer, for express vans of 3500 and 4500. I am not 100% but the express axles went into a production problem when the AAM went on strike. Dodge was effected by this strike as well. That might just be an AAM axle. Do you have a picture? What are you going to put it into? Maybe a truggy? How much afterarket support are you expecting to find, or anticipate needing? |
|
| |
|
04-26-2008, 11:45 AM
| #3 |
| Junior Member Join Date: Apr 2008
Posts: 2
| 1.5 inch 35 spline shafts http://i283.photobucket.com/albums/k...e/100_2451.jpg http://i283.photobucket.com/albums/k...e/1rearend.jpg Last edited by truggyman; 04-27-2008 at 11:34 AM. |
|
| |
|
04-26-2008, 10:39 PM
| #4 |
| Senior Member  Join Date: Jan 2008
Posts: 156
| thats a dana 60 im 90 percent positive |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dual brake reservoir, rear section is for rear brakes? | K1500_Dude | Chevy Truck Forum | 11 | 04-09-2008 11:10 AM |
| rear end | stone48444 | Chevy Truck Forum | 4 | 03-16-2008 09:27 PM |
| rear end | turbosean | Mazda Truck Forum | 0 | 07-11-2006 03:02 AM |
| Rear End | Big Jim | Chevy Truck Forum | 3 | 01-30-2006 11:28 AM |
| The vehicle, an lder sedan, slid under the rear of the truck and was crushed as far back as the rear (Chico Enterprise-Record) | trucknews | Truck News (headlines) | 0 | 09-30-2005 01:30 AM |
