![]() |
![]() |
|
|||||||
![]() |
Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
|
|
LinkBack | Thread Tools | Search this Thread |
|
|
#1 (permalink) |
|
Full Member
Join Date: Jun 2008
Location: Moscow Mills, MO
Posts: 17
![]() |
Got some questions bout my chevy
I recently just bought a 1980 Cust. Deluxe k10 long bed, does it have power steering and brakes, and what kind of brakes does it have? Any answers will be appreciated.
|
|
|
|
|
|
#2 (permalink) | |
|
Senior Member
Join Date: Feb 2008
Posts: 150
![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
2. It did when new. Look behind the brake fluid reservoir on top of the master cylinder. There should be a round device the size of a bunt cake bolted to the firewall and bolted to the master cylinder. There should be a large vacuum line running from it to the carburetor. 3. New it had front disks and rear drum hydraulic brakes on two circuits divided in an X pattern so that the front left and right rear are on one circuit and the front right and left rear are on the other. If you can post a few pictures of the engine bay I'll label some of the items mentioned if needed. |
|
|
|
|
|
|
#3 (permalink) |
|
Senior Member
Join Date: Dec 2006
Location: jax,fl
Posts: 800
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
80cdk10 a little more info on your truck. tell us everything you know about it and what you have problems with. as far as i can tell from this yes it has power steering. look on the front driver side you should see a little canister about half way down hooked up to a belt. and brakes i hope you have them! LOL J/K just standard brakes. the easy way to find out is take one off and go to the parts store and have them match it up so you know for sure. hope that helps and somebody will chime in and tell you something else
__________________
A dirty mind is a terrible thing to waste!
|
|
|
|
|
|
#4 (permalink) |
|
Full Member
Join Date: Jun 2008
Location: Moscow Mills, MO
Posts: 17
![]() |
it has a 350, and is 4 wheel drive but the front drive shaft is taken off, no biggie there, still got the drive shaft. I bought it from my grandfather, it is an old farm truck but still runs good after two years sitting in a shed. My dad but 3/4 ton leaf springs on it when he was in high school. Very solid truck. 4 speed on the floor. only rust is on the rear fenders. easily fixed.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New member question bout 96 chevy 4x4 | Faster4344 | Chevy Truck Forum | 26 | 07-06-2008 08:51 AM |
| gonna be gone for bout a week | 72'CaminoKid | Off-Topic | 0 | 12-16-2007 09:14 PM |
| Chevy Truck 85 Questions | claytonfrnk | Chevy Truck Forum | 11 | 02-02-2007 08:18 PM |
| 91 chevy 4x4, lots of questions | clpfiste | Chevy Truck Forum | 5 | 09-28-2006 08:56 AM |