Bleeding brakes

brad4eva · 07-02-2008, 01:44 PM

Ok i pumped my brakes a few times with help of a friend he bleed them , There wasnt fluid coming out of the cyclinder it was coming out beside the gas tank , is that a problem? the line looks pretty rusty , how much r new lines

gmctrucks · 07-02-2008, 02:07 PM

With one looking like that replace all the steel lines I know that one can buy just straight line and use a bender to make it work or how about a junk yard.
Good luck! GMC

heavychevy85 · 07-02-2008, 02:17 PM

just if its not rusted to bad just cut out the piece and put compression fittings on each end if its too bad just unhook it form the booster and run a new linefor one side you might have 20 bucks if that

07-02-2008, 01:44 PM	#1 (permalink)
brad4eva Senior Member Join Date: Apr 2008 Location: Tennessee Posts: 291	Bleeding brakes Ok i pumped my brakes a few times with help of a friend he bleed them , There wasnt fluid coming out of the cyclinder it was coming out beside the gas tank , is that a problem? the line looks pretty rusty , how much r new lines __________________ //B-rad

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Bleeding Issue	SilverK96	Ford Truck Forum	8	04-01-2008 06:11 PM
brakes	rdnkmudder	Ford Truck Forum	3	11-03-2006 02:04 PM
Bleeding The Clutch?	Farm Boy	Chevy Truck Forum	17	06-07-2006 11:30 PM
bleeding brakes	jims	Ford Truck Forum	3	01-20-2006 10:24 AM
clutch bleeding	72'CaminoKid	Ford Truck Forum	6	11-28-2005 09:42 PM

07-02-2008, 02:07 PM	#2 (permalink)
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 1,060	With one looking like that replace all the steel lines I know that one can buy just straight line and use a bender to make it work or how about a junk yard. Good luck! GMC

07-02-2008, 02:17 PM	#3 (permalink)
heavychevy85 Senior Member Join Date: May 2008 Location: Muncy, PA Posts: 154	just if its not rusted to bad just cut out the piece and put compression fittings on each end if its too bad just unhook it form the booster and run a new linefor one side you might have 20 bucks if that