![]() | ![]() |
| | |||||||
| Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 |
| Junior Member Join Date: Aug 2008 Location: N.Georgia
Posts: 1
| My tailgate hooks have been sticking in an open position so that the gate will not latch shut. I was told to lube the spring at each hook and at gate latch. Anyone ever had this issue? What lube should I use?...WD-40? Also, do I have to remove the 3 bolts from the inside of the bed to do this? Thanks in advance!!!!! MCGA |
| | |
| | #2 |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania.
Posts: 2,974
| I have just shot them with WD-40 in the past, sprayed right in, and never had an issue. They stick ocasionally, it does work. I would not think you should have to rmove everything, unless you wanted to completely clean and lube everything. Welcome to the forum by the way.
__________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 ![]() 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift ![]() 31x10.50 Liberator A/T's |
| | |
| | #3 |
| Senior Member Join Date: Dec 2006 Location: jax,fl
Posts: 991
| after you use wd40 and get it working good. put some grease in there so you will not have to worry about it for awhile
__________________ A dirty mind is a terrible thing to waste! |
| | |
| | #4 |
| mod-o-tator Join Date: Feb 2006 Location: michigan
Posts: 4,058
| the springs are not your problem, chevy has a poorly design tailgate handle. if you were to unhook the rods from your handle, i would be willing to bet a cold beverage that the latches would close like they should. you need to remove your handle and drill the factory rivet out and replace it with a bolt and nylock nut. New Truck
__________________ member map add yourself Last edited by mudseeker; 08-03-2008 at 10:03 PM. Reason: spelling |
| | |
| | #5 |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania.
Posts: 2,974
| what is it with people betting a cold drink all of a sudden? LOL.... There are minors on this forum you know! LOL....
__________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 ![]() 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift ![]() 31x10.50 Liberator A/T's |
| | |
| | #6 |
| Senior Member Join Date: Mar 2008 Location: levittown pa
Posts: 2,174
| A cold beverage cold be a soda or some water lol |
| | |
| | #7 |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania.
Posts: 2,974
| o right, maybe I should get my mind out of the gutter....LOL....
__________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 ![]() 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift ![]() 31x10.50 Liberator A/T's |
| | |
| | #8 |
| Senior Member Join Date: Mar 2008 Location: levittown pa
Posts: 2,174
| Someday you might jr |
| | |
| | #9 |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania.
Posts: 2,974
| Maybe... only time will tell! LOL...
__________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 ![]() 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift ![]() 31x10.50 Liberator A/T's |
| | |
| | #10 |
| mod-o-tator Join Date: Feb 2006 Location: michigan
Posts: 4,058
| minors aren't a problem as long as i don't share it with them.
__________________ member map add yourself |
| | |
| Thread Tools | Search this Thread |
|
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2003 Chevy Silverado AWD Turbo | Deryl | Chevy Truck Forum | 0 | 05-21-2008 04:36 PM |
| 2003 Chevy C1500 2wd (5.3 Liter) | 06BLACKGMC | Chevy Truck Forum | 0 | 10-08-2007 02:19 PM |
| 2003 chevy 2500hd | brandpeto | Truck Classifieds | 0 | 03-28-2007 06:43 PM |
| Rear end lube ? | ibramin | Dodge Truck Forum | 4 | 11-22-2006 03:44 PM |
| 2003 Chevy 2500HD 4x4 | fireman649 | Truck Classifieds | 0 | 09-11-2006 07:28 PM |