Gears for a Dana 44

obananna · 08-07-2008, 08:30 PM

Anyone have any suggestions as to the cheapest place to get a set of 4:10 gears for a dana 44 front axle on a 85 3/4 ton? I'm looking to get some cheap but don't want cheap quality. Thanks for the help.

junior3382 · 08-07-2008, 08:41 PM

How cheap? I mean a gear replacement will run ya close to 1500 bucks give or take regardless, what does it have now? Is this nescesary? There may be another solution.... so what is the end goal of doing this?

stumpuller454 · 08-07-2008, 09:23 PM

RANDY`s RING AND PINION!!! checkem out online....lots of $$ options and all is good stuff, cheap too...

Lonesome7.3 · 08-08-2008, 05:14 AM

Randy's is the way to go. Just keep in mind, you do get what you pay for. You might get lucky with a used set, but that is a crapp shoot.

What gears are you currently running. If higher than 4:10, you may have to change your carrier as well.

obananna · 08-08-2008, 08:30 PM

Thanks for the help guys I'll check them out. I'm running 4:10's and need to do the front end my ring gear is going out starting to take some teeth off of it.

08-07-2008, 08:30 PM	#1
obananna Senior Member Join Date: Dec 2007 Location: Michigan Posts: 70	Gears for a Dana 44 Anyone have any suggestions as to the cheapest place to get a set of 4:10 gears for a dana 44 front axle on a 85 3/4 ton? I'm looking to get some cheap but don't want cheap quality. Thanks for the help.

08-07-2008, 08:41 PM	#2
junior3382 Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster country, Pennsylvania. Posts: 2,974	How cheap? I mean a gear replacement will run ya close to 1500 bucks give or take regardless, what does it have now? Is this nescesary? There may be another solution.... so what is the end goal of doing this? __________________ Lets get some mud on the tires...eh?!?!? OWN: 1998 Chevy Blazer ls 4x4 4.3l Vortec V6 1998 Mazda B3000 SE 4WD 3.0L V6 3" lift 31x10.50 Liberator A/T's

08-07-2008, 09:23 PM	#3
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 895	RANDY`s RING AND PINION!!! checkem out online....lots of $$ options and all is good stuff, cheap too... __________________ 1998 GMC K2500 Ext.cab short box 454ci (supercharger coming soon!) *1951 Chevrolet 1420 pickup like new!* Red seal certified Journeyman Automotive Mechanic

08-08-2008, 05:14 AM	#4
Lonesome7.3 Senior Member Join Date: Jul 2008 Location: Columbus GA Posts: 406	Randy's is the way to go. Just keep in mind, you do get what you pay for. You might get lucky with a used set, but that is a crapp shoot. What gears are you currently running. If higher than 4:10, you may have to change your carrier as well. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-08-2008, 08:30 PM	#5
obananna Senior Member Join Date: Dec 2007 Location: Michigan Posts: 70	Thanks for the help guys I'll check them out. I'm running 4:10's and need to do the front end my ring gear is going out starting to take some teeth off of it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gears	BigWill	4x4 trucks / off road	11	01-17-2008 04:39 PM
2.73 to 3.08 gears	Donut John	Chevy Truck Forum	6	12-07-2007 11:38 PM
dana 60 stearing knuckle seals.......	charlie g	Ford Truck Forum	1	01-02-2007 03:17 PM
Dana 70HD rear diff with 4:10 gears	chevyguy	Truck Classifieds	2	10-31-2006 11:09 PM
Dana Corporation Providing Axles and Driveshafts for General Motors 4x4 Medium-Duty Trucks (The Auto Channel)	trucknews	Truck News (headlines)	0	11-10-2004 01:30 AM