![]() | ![]() |
| | |||||||
| Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 |
| Senior Member Join Date: Jul 2008 Location: Mississippi
Posts: 144
| Need Help ASAP with 85 C10 wiring problem's I have an 85 Chevy c10 that i'm having some sever issues with. I had eveything working good until yesterday morning and then all of a sudden the fuel gauge pegged out way on the other side of full and all of a sudden the blinkers quit working does anyone have any ideas on what could be the causing these problems?
__________________ Chevyracer8262 |
| | |
| | #2 |
| Senior Member Join Date: Aug 2008 Location: williamsburg virginia
Posts: 200
| check the printed circuit board on the back of the guage cluster for breaks or burn marks.. also check your grounds. you could have have lost a ground somewhere. does your blinker light stay on when your turn signal in activated? |
| | |
| | #3 |
| Senior Member Join Date: Jul 2008 Location: Mississippi
Posts: 144
| No they don't work at all. Everything worked fine untill I went to pulling fuses yesterday checking for blown fuses from other issues after that everything went crazy. I've tried different flasher fuses and still nothing.
__________________ Chevyracer8262 |
| | |
| | #4 |
| Senior Member Join Date: Aug 2008 Location: williamsburg virginia
Posts: 200
| if you have never taken the guage cluster at,then your problem might be at the fuse block .check all your fuses,wires etc. you might have wiggled something loose. |
| | |
| | #5 |
| Senior Member Join Date: Jul 2008 Location: Mississippi
Posts: 144
| Well i checked all of the connections and wires as best I could last night there's power at the fuse panel and power at the steering column connectors so i don't know what could be causing this.
__________________ Chevyracer8262 |
| | |
| | #6 |
| Senior Member Join Date: Sep 2008
Posts: 301
| I had a simalar problem form my 78 C-10. And I had to pull all the connections apart and clean them. Both the front and rear of each plug ( head light switch, heater, wipers, and any other dash connection I found) and by doing this and using a jumper wire to see if I could get juice thru or around a switch they all came on. And to date still operate correctly. Hammer |
| | |
| | #7 |
| Senior Member Join Date: Jul 2008 Location: Mississippi
Posts: 144
| Thank's I'll give that a try.
__________________ Chevyracer8262 |
| | |
| Thread Tools | Search this Thread |
|
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stuck valve need help ASAP | 1989gmcsonoma | GMC Truck Forum | 6 | 08-24-2008 12:37 PM |
| I need a set of DRW front 4x4 hubs ASAP!!!!!!!!!! | Lonesome7.3 | Truck Classifieds | 7 | 08-01-2008 03:11 AM |
| Emergency! Need firing order ASAP!!!! | cporrino | Chevy Truck Forum | 20 | 01-02-2008 11:55 PM |
| science help asap | 72'CaminoKid | Off-Topic | 20 | 11-19-2007 03:33 PM |
| I need help Transmission ASAP | bevansbc | Chevy Truck Forum | 3 | 02-01-2006 08:13 AM |