| | |
| |||||||
 | Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
10-11-2008, 10:09 PM
| #11 |
| Senior Member Join Date: Oct 2008 Location: west kentucky
Posts: 73
 | im gonna go check the fuses yall dont get to far away ill be right back |
|  |
|
10-11-2008, 10:24 PM
| #12 |
| Senior Member  Join Date: Oct 2008 Location: Northern Michigan
Posts: 1,177
| We'll be here |
|
| |
|
10-11-2008, 10:29 PM
| #13 |
| Senior Member Join Date: Oct 2008 Location: west kentucky
Posts: 73
| you guys r right on the money i have no blown fuse i found the black box for the cruise checked the conections the cable is hooked up to the throttle body. can you take the cruise switch apart and clean the contacts r should i start at the throttle body and work back the other way |
|
| |
|
10-11-2008, 10:31 PM
| #14 |
| Senior Member  Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania.
Posts: 3,170
 | I would NOT take that switch apart, they are a pain, and expensive if you destroy it. I would lube the cables from the TBI back and with a new fuse, run it and see if it works alright for ya. Fuses go, it is not an uncommon occurance, so you may be fine.
__________________ The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead!   |
|
| |
|
10-11-2008, 10:32 PM
| #15 |
| Senior Member Join Date: Oct 2008 Location: Northern Michigan
Posts: 1,177
| Well I'm not sure about the multi funtion switch but if everything else works blinkers and lights and what not I seriously doubt that that is you problem. You could start at the TB and work your way to the box and lust clean everything up that's definalty a good place to start. |
|
| |
|
10-11-2008, 10:37 PM
| #16 |
| Senior Member  Join Date: Oct 2008 Location: south BAMA
Posts: 284
| dubble check the cable make sure its not broke somewhere in the casing
__________________ **IF YOU AIN'T FIRST YOUR LAST** SHAKE AND BAKE !!!!!!!!  |
|
| |
|
10-11-2008, 10:40 PM
| #17 |
| Senior Member Join Date: Oct 2008 Location: west kentucky
Posts: 73
| thanks a bunch i have had a blast worken on this truck getten the kinks worked out been driven a jeep wrangler for the past 2 years kept my jeep but sure do like haven a chevy 4x4 back in the driveway  |
|
| |
|
10-11-2008, 10:42 PM
| #18 |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania.
Posts: 3,170
| well, I am glad we could help. Don't be a stranger, we can try to help with most any problem.
__________________ The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead! |
|
| |
|
10-12-2008, 03:13 PM
| #19 |
| Senior Member Join Date: Oct 2008 Location: west kentucky
Posts: 73
| 94 chevy still no cruise butt learning alot 94 chevy still no cruise the cable to the t b is in good shape the motor inside the black box looks in good shape (no i did not mess with anything other than made sure everything was not froze up) pulled the cable and lubed it. WE talked about fuses last night what r the big silver 30 amp fuses on the right bottom of the fuse pannel or what do they run |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cruise control help | woody367 | GMC Truck Forum | 13 | 09-09-2008 10:29 PM |
| Sensitive cruise control | RASwift | GMC Truck Forum | 5 | 05-08-2008 10:41 PM |
| Cruise control troubleshooting | rubberhead | Chevy Truck Forum | 6 | 08-13-2007 08:52 PM |
| cruise control | vanhal | Chevy Truck Forum | 3 | 12-19-2006 05:09 PM |
| cruise control | vanhal | Chevy Truck Forum | 1 | 02-11-2006 10:52 PM |
