| | |
| |||||||
 | Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
12-15-2008, 06:03 AM
| #11 |
| Senior Member  Join Date: Dec 2006 Location: jax,fl
Posts: 1,185
  | please do not use wd-40 it will rust the piston walls then you will have to take the motor apart and hone the walls so the rings can set. but like i said with tranny fluid. you only use a little and it will lube all the rings and walls and after start up it will smoke just for about 30 sec. and done. sence you need to change the oil after you get it broke in.
__________________ A dirty mind is a terrible thing to waste!  |
|  |
|
12-15-2008, 07:38 AM
| #12 |
| Senior Member  Join Date: Mar 2008 Location: N.Y.
Posts: 4,223
| Is the motor still crated with the moisture preventer? Oem's are assembled with spindle oil, rings, bores, cranks etc., cams and lifters with moly lube. Avoid such things as wd-40 as i find them to contain water! 10w motoroil will do what you want in the bores. I would fill the crankcase, pull the distributer and turn the oil pump with a drill to circulate the oil and refill the lifters, I would even consider doing it let it stand and do it again BEFORE turning the engine over at all (even by hand)
__________________ 4 wheels move the body 2 wheels move the soul B.W.A.I |
|
| |
|
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Parting out: 92 Chevy S-10 Blazer | greasemonkey | Chevy Truck Forum | 9 | 10-31-2008 06:20 AM |
| 1985 chevy 3/4 ton truck NICE!!! | 007 | Truck Classifieds | 0 | 09-28-2008 02:01 PM |
| 1985 Chevy Kodiak 70 Digger Derrick W/bucket*40' Altec Boom | mrhaney | Truck Classifieds | 1 | 05-26-2008 02:07 PM |
| 1985 Chevy Extended Cab 4x4 | cur_dog | Chevy Truck Forum | 9 | 04-02-2008 07:39 PM |
| 1985 Chevy 1-ton $must Sell$ | HIGH86TX | Truck Classifieds | 6 | 12-27-2007 12:29 PM |
