Building a circle track S-10

csracing93 · 03-29-2009, 08:20 PM

Hey I'm building a circle track S-10 for our local asphalt track, which is 3/8 mile banked. need to find stock spindles that will fit S-10 that will give me 2 inch drop. any one have any Ideas. any help will greatly be appreciated.

gmctrucks · 03-29-2009, 11:17 PM

Don't your wheels on one side of the truck have to be wider?

bradrhale · 03-31-2009, 09:31 AM

why do you say stock?? summitracing sells drop spindles for your setup.

csracing93 · 04-02-2009, 08:23 PM

yeah we run offset wheels, I'm just trying to get it below 6 inch ride height so I can make height adjustments our min height is 6 inches and really don't want to alter lower a-arms. If I can get drop spindles from a gm that would fit The rules specify stock spindles

mudseeker · 04-02-2009, 08:34 PM

try looking at some rear wheel drive cars from the 80's.

csracing93 · 04-02-2009, 08:54 PM

okay thanks

03-29-2009, 08:20 PM	#1
csracing93 Full Member Join Date: Nov 2008 Location: Warren, Ohio Posts: 39	Building a circle track S-10 Hey I'm building a circle track S-10 for our local asphalt track, which is 3/8 mile banked. need to find stock spindles that will fit S-10 that will give me 2 inch drop. any one have any Ideas. any help will greatly be appreciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Building lowering shackles	silverhairdeere	GMC Truck Forum	5	12-02-2008 06:47 PM
Building up a 360 for my D250	NxNW	Dodge Truck Forum	3	05-18-2008 04:06 PM
building blocks	bradrhale	General Truck Forum	2	06-10-2006 07:58 AM
Building 383 stroker	otrman	Chevy Truck Forum	3	04-13-2006 10:22 PM

03-29-2009, 11:17 PM	#2
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 4,645	Don't your wheels on one side of the truck have to be wider?

03-31-2009, 09:31 AM	#3
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 9,512	why do you say stock?? summitracing sells drop spindles for your setup.

04-02-2009, 08:23 PM	#4
csracing93 Full Member Join Date: Nov 2008 Location: Warren, Ohio Posts: 39	yeah we run offset wheels, I'm just trying to get it below 6 inch ride height so I can make height adjustments our min height is 6 inches and really don't want to alter lower a-arms. If I can get drop spindles from a gm that would fit The rules specify stock spindles

04-02-2009, 08:34 PM	#5
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 7,155	try looking at some rear wheel drive cars from the 80's.

04-02-2009, 08:54 PM	#6
csracing93 Full Member Join Date: Nov 2008 Location: Warren, Ohio Posts: 39	okay thanks