3/4 ton swap on a 91 project under way - Page 5

hotrodpc · 08-11-2009, 01:08 PM

OK, yeah by the pic, you have the type that is in a slotted bolt hole and you have that cam there, that as you turn it, it will pull the A arm in or out. Looks like you have plenty of room for adjustment in one direction, and not alot in the other.

badtothebowtie · 08-11-2009, 01:11 PM

the problem is the hole isnt sloted

badtothebowtie · 08-13-2009, 01:05 PM

ok thanks guys for ur help but sadly the truck is going to the shredder both ball joints failed and the spindle came out while i was driving i cant stick anymore money into it so i have to say bye bye

bradrhale · 08-13-2009, 01:50 PM

you ok?? how much did i tear up?? are you sure you want to send it to the shedder or can you salvage anything out of it??

badtothebowtie · 08-13-2009, 01:53 PM

its fine im fine just cant put more money into it and i wont put used parts on it again and there aint much on it worth a flip so its gotta go the right side tie rod bent both ball joints trash wheel bearing cv joint roter and caliper all trash

bradrhale · 08-13-2009, 01:55 PM

glad to hear you made it out in one piece. wish ya luck with it.

badtothebowtie · 08-13-2009, 01:59 PM

ty im excited to get my dream truck back had to get rid of months back cuz of wireing alt charged at 26 volts went threw 5 new alts

hotrodpc · 08-13-2009, 02:56 PM

Glad you're OK, it could have been a bad situation for sure. But don't shred it. There is still a butt load of parts on the truck that are highly sought after. So part it out. Don't be greedy on the parts, and they will go fast and you will actually get an education just taking it apart.

badtothebowtie · 08-13-2009, 03:10 PM

like wat im keeping the moter and tranny and t case and springs wat eles is wanted

hotrodpc · 08-13-2009, 03:23 PM

Bed, front clip, rear end, etc etc, Lots of parts.

08-11-2009, 01:08 PM	#41
hotrodpc Senior Member Join Date: Jul 2008 Location: OKC, OK Posts: 3,145	OK, yeah by the pic, you have the type that is in a slotted bolt hole and you have that cam there, that as you turn it, it will pull the A arm in or out. Looks like you have plenty of room for adjustment in one direction, and not alot in the other. __________________ *Winners NEVER Quit , Quitters NEVER Win !!!*

08-11-2009, 01:11 PM	#42
badtothebowtie Senior Member Join Date: Jun 2009 Location: waterloo IL Posts: 157	the problem is the hole isnt sloted __________________ IF U GO OUT U HAVE TO DRESS UP WHY NOT WARE A BOWTIE

08-13-2009, 01:05 PM	#43
badtothebowtie Senior Member Join Date: Jun 2009 Location: waterloo IL Posts: 157	ok thanks guys for ur help but sadly the truck is going to the shredder both ball joints failed and the spindle came out while i was driving i cant stick anymore money into it so i have to say bye bye __________________ IF U GO OUT U HAVE TO DRESS UP WHY NOT WARE A BOWTIE

08-13-2009, 01:53 PM	#45
badtothebowtie Senior Member Join Date: Jun 2009 Location: waterloo IL Posts: 157	its fine im fine just cant put more money into it and i wont put used parts on it again and there aint much on it worth a flip so its gotta go the right side tie rod bent both ball joints trash wheel bearing cv joint roter and caliper all trash __________________ IF U GO OUT U HAVE TO DRESS UP WHY NOT WARE A BOWTIE

08-13-2009, 01:59 PM	#47
badtothebowtie Senior Member Join Date: Jun 2009 Location: waterloo IL Posts: 157	ty im excited to get my dream truck back had to get rid of months back cuz of wireing alt charged at 26 volts went threw 5 new alts __________________ IF U GO OUT U HAVE TO DRESS UP WHY NOT WARE A BOWTIE

08-13-2009, 01:50 PM	#44
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,021	you ok?? how much did i tear up?? are you sure you want to send it to the shedder or can you salvage anything out of it??

08-13-2009, 01:55 PM	#46
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,021	glad to hear you made it out in one piece. wish ya luck with it.

08-13-2009, 02:56 PM	#48
hotrodpc Senior Member Join Date: Jul 2008 Location: OKC, OK Posts: 3,145	Glad you're OK, it could have been a bad situation for sure. But don't shred it. There is still a butt load of parts on the truck that are highly sought after. So part it out. Don't be greedy on the parts, and they will go fast and you will actually get an education just taking it apart. __________________ *Winners NEVER Quit , Quitters NEVER Win !!!*

08-13-2009, 03:10 PM	#49
badtothebowtie Senior Member Join Date: Jun 2009 Location: waterloo IL Posts: 157	like wat im keeping the moter and tranny and t case and springs wat eles is wanted __________________ IF U GO OUT U HAVE TO DRESS UP WHY NOT WARE A BOWTIE

08-13-2009, 03:23 PM	#50
hotrodpc Senior Member Join Date: Jul 2008 Location: OKC, OK Posts: 3,145	Bed, front clip, rear end, etc etc, Lots of parts. __________________ *Winners NEVER Quit , Quitters NEVER Win !!!*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 79 Project	silverChevy79	Chevy Truck Forum	22	04-27-2009 10:46 AM
Latest project, project JK (56k beware)	junior3382	4x4 trucks / off road	8	04-10-2009 07:25 AM
305 project	fairlanefreddy	Chevy Truck Forum	5	03-07-2009 06:02 AM
89 V8 s10 PROJECT	DNN	Truck Classifieds	9	02-28-2009 04:10 PM
My Lil Project Car.	MafiaMegacab07	Off-Topic	7	06-20-2008 12:58 PM