![]() | ![]() |
| | |||||||
| Chevy Truck Forum - Chevrolet / Chevy trucks and their accessories forum. |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 |
| Junior Member Join Date: Sep 2006
Posts: 1
| 94' Suburban ABS Pump ??? I still have brakes, but the pedal fades if applied slowly. The master cylinder has been replaced and the brakes bled with no more air in the system. The front pin (looks like some kind of proportioning valve) on the lower side of the ABS pump pops out if I let the pedal get near the floor. One more note, if you pump the brakes the pedal is high and firm, but let it set and hit them and it fades. Any help with this would be great!! |
| | |
| | #2 |
| Full Member Join Date: Aug 2006
Posts: 19
| There's a small tool that I've used before on older Chevy's that compresses the front pin while you bleed the brakes. If you don't use it, you won't get all the air out of the rear brakes. |
| | |
| Thread Tools | Search this Thread |
|
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuel Pump will not turn on? | cab41610 | Chevy Truck Forum | 7 | 07-17-2006 08:33 PM |
| 85 silverado fuel pump mystery | mntman | Chevy Truck Forum | 2 | 01-19-2006 08:35 AM |
| 1987 throttle body fuel pump problem | wojeepster | Chevy Truck Forum | 9 | 12-01-2005 03:26 PM |
| Power steering pump shafts keep shearing off | AKHD | Chevy Truck Forum | 1 | 10-25-2005 12:36 PM |
| Oil Pump question? | krobb10 | Ford Truck Forum | 6 | 07-19-2005 04:42 AM |