Differential Rebuild Cost?

74vert · 07-24-2007, 05:08 AM

I'm considering upgrading to 3.73 gears, front and back. What is the typical price to have gears changed from one size to another, including differential rebuilding?

75K30 · 07-24-2007, 09:08 AM

Been a while since I have had to pay for rings and pinions to be installed, but I do recall spending about $1500.00 to have the front and rear axles re-geared with bearings and seals.

Ford4x4Chik27 · 07-24-2007, 09:36 AM

Depends on where you're at. Got a guy out in Auburn CA that'll install r&p for $100... and he's good too

Moostang · 07-24-2007, 11:30 AM

Quote:

Originally Posted by Ford4x4Chik27

Depends on where you're at. Got a guy out in Auburn CA that'll install r&p for $100... and he's good too

His name doesn't happen to be Dave?

74vert · 07-24-2007, 07:43 PM

Thanks for the replies/ $100 labor to $1500 parts and labor; big range. I'm in Eastern Tennessee. Chime in if you can recommend a good shop in this area.

ddraszt · 07-24-2007, 08:47 PM

front and rear run ya between 1500 and 2000 typically from a shop.

07-24-2007, 05:08 AM	#1
74vert Junior Member Join Date: Jun 2007 Location: Smoky Mountains Posts: 9	Differential Rebuild Cost? I'm considering upgrading to 3.73 gears, front and back. What is the typical price to have gears changed from one size to another, including differential rebuilding?

07-24-2007, 09:36 AM	#3
Ford4x4Chik27 Senior Member Join Date: Sep 2004 Location: Sac-Town, Cali Posts: 1,585	Depends on where you're at. Got a guy out in Auburn CA that'll install r&p for $100... and he's good too __________________ '93 Isuzu Amigo, Toyota Axles/Tcase/Drivelines, 35" MTR's '01 Pathfinder, making a huge effort to keep it stock, since it's my DD

07-24-2007, 08:47 PM	#6
ddraszt Full Member Join Date: Jun 2007 Location: arlington wa Posts: 43	front and rear run ya between 1500 and 2000 typically from a shop. __________________ "It is what it is"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
94 K1500 350 engine rebuild	klink70	Chevy Truck Forum	4	01-17-2007 10:16 AM
9" Ford 3.50 Differential Kit	Steve Law	Introductions	1	05-28-2006 07:23 PM
Amsoil products / to offer at dealer cost.	Amsoil/guy	Truck Classifieds	0	11-07-2005 02:55 PM
Motor Rebuild... Going bigger??	Ozymandias	Chevy Truck Forum	2	09-22-2005 03:04 PM
Nv 4500 tranny rebuild tutorial/guide	tonyseahawk	Chevy Truck Forum	0	06-04-2005 04:40 PM

07-24-2007, 09:08 AM	#2
75K30 Senior Member Join Date: Jul 2006 Posts: 2,992	Been a while since I have had to pay for rings and pinions to be installed, but I do recall spending about $1500.00 to have the front and rear axles re-geared with bearings and seals.

07-24-2007, 07:43 PM	#5
74vert Junior Member Join Date: Jun 2007 Location: Smoky Mountains Posts: 9	Thanks for the replies/ $100 labor to $1500 parts and labor; big range. I'm in Eastern Tennessee. Chime in if you can recommend a good shop in this area.