• Lone Bear

    There is no available content written by Lone Bear
  • Recent Posts

    TerryC

    no go up hill!!

    You might want to check your timing as you are laying on the loud pedal.

    My brother had the same issue and it ended up being a cracked cam

    TerryC Today, 04:30 PM Go to last post
    ISLAND TRITON

    weather

    A nice day today..meltage...got some of the dregs of winter last night though...roads were greasy.....the dodge likes to slide all over the place in that....sketchy

    ISLAND TRITON Today, 04:16 PM Go to last post
    JACKTOO

    04 f250 5.4 exhaust

    Hey got the mufflers that came with sys (from LMC truck high preformance cat back for 03 F150) cool looking black 22 1/2" long .2 1/4" inlet

    JACKTOO Today, 04:04 PM Go to last post
    mib2000

    door dinger sounds for no reason 03 silverado

    I dont wanna get rid of the dinger . All I needed to know is what the dinging was telling me . It only does it once in a blue moon when I turn the truck

    mib2000 Today, 03:47 PM Go to last post
    mib2000

    5.7 TBI issue im lost

    hey mike . Im not an expert so i can only give you what Ive been through . My 2003 silverado had a similar issue with idol really rough and if i drove

    mib2000 Today, 03:35 PM Go to last post
    awbooth

    2001 silverado fuel lines rusted through at plastic to metal couplink connection...

    not a problem, I've seen guys cut a huge square out of their bed, than they are able to change the fuel pump, fuel lines etc., I'm not sure i want to

    awbooth Today, 03:32 PM Go to last post
  • Most Viewed Truck Forum Discussions (past year)

    Blu

    Is my engine ruined?

    Thread Starter: Blu

    I believe a small bolt fell into the intake of my 1990 chevy 1500 4.3 liter. The bolt falling into the motor was the result of poorly improvised and poorly

    Last Post By: MrMarty51 10-06-2014, 07:11 AM Go to last post
    slowjo

    1994 GMC Sierra 1500 V6 TBI No Start

    Thread Starter: slowjo

    truck died while driving and will not restart. replaced fuel filter. fuel pump is working. i have fuel pulsing out of the injector jets while cranking

    Last Post By: acton mike 06-09-2014, 06:17 PM Go to last post
    bullit350

    1991 gmc 2500 5.7 black smoke,running rough pulling hills

    Thread Starter: bullit350

    hello guys,i have a 1991 gmc 2500 5.7 that i am stumped on. It runs great until you come to a hill then it shakes and runs rough with black smoke coming

    Last Post By: bullit350 08-31-2014, 09:23 PM Go to last post
    mikecross

    Help me name this part

    Thread Starter: mikecross

    I've got oil leaking from this brass fitting from behind my distributor does anyone know what it is?

    I'm sure it's something small and someone

    Last Post By: mikecross 08-28-2014, 05:30 AM Go to last post
    dvdswan

    New direction

    Thread Starter: dvdswan

    So like most of you I've been doing little things to my truck here and there. I bought the truck stock in 03 with 88K on it, I added PW, PDL, PM from

    Last Post By: chevychase 10-24-2014, 06:43 PM Go to last post
  • Most Active Truck Forum Topics (past 6 mos)

    MrMarty51

    My Attempt at Doing an In~Frame Cam Change

    Thread Starter: MrMarty51

    Disconnecting/removing stuff to get at the timing cover.

    I usually try to remember to sprinkl and spread some floor dry around before opening

    Last Post By: leolkfrm 02-13-2015, 06:46 PM Go to last post
    HeavyB

    Bringing back 1991 C1500 after sitting for 17 yrs

    Thread Starter: HeavyB

    Looking to take advantage of your experience. What should I be watching for before I try and start this little jewel up?

    It's a 1991 C1500

    Last Post By: scavanger 02-15-2015, 07:43 PM Go to last post
    ISLAND TRITON

    ISLAND TRITON truck saga

    Thread Starter: ISLAND TRITON

    why not now.......this will be my build thread on here. if I don't have something on the go for my truck, it's likely cause I can't at the moment. can't

    Last Post By: ISLAND TRITON 03-27-2015, 04:35 PM Go to last post
    MrMarty51

    TICK, TICK, TICK, STILL AN ENJUN NOISE

    Thread Starter: MrMarty51

    OK, new cam, lifters, pushrods, rockers and timing chain set.
    Most of the noises I had been hearing is gone, except for, one constant ticking.

    Last Post By: MrMarty51 03-01-2015, 08:48 AM Go to last post
    southbound

    Loud knocking under strain

    Thread Starter: southbound

    It's 1990 k2500 light duty 5.7 auto.....

    Coming home from work the other night I came up on a long hill and started up it just like normal..

    Last Post By: southbound 12-07-2014, 04:37 PM Go to last post