front wheel bearing/hub assembly on a 2001 Dodge Ram 1500
I'm replacing the front wheel bearing/hub assembly on a 2001 Dodge Ram 1500 with 4WD and rear wheel antilock brakes. I have removed the wheel, caliper, caliper holder, rotor, hub nut and the three bolts holding on the bearing/hub assembly. From what I have read, it is common for the bearing/hub to become seized onto the axle. This is true in my case. I used a wheel puller to try and remove the hub bearing and all that came off was the front part of the assembly that attaches to the axle leaving the back part of the assembly still on the vehicle.:eek: I don't see anyway that I can use the wheel puller to help me remove this portion. I'm looking for any ideas that would help.