Problem with 4x4

moparman1992 · 12-12-2008, 09:33 AM

transfer case engages but front hubs dont any help thanks

mudseeker · 12-12-2008, 09:34 AM

the year of the truck would help us out.

moparman1992 · 12-12-2008, 09:35 AM

sorry about that 1992 dakota

stumpuller454 · 12-12-2008, 10:56 AM

Look for vacuum leaks....there are miles of vacuum lines on that puppy, common to burn through around engine, or rub through along the crossmember or trans....

Jim44 · 08-03-2009, 11:38 AM

My '92 Dodge W-150 was acting up when I shifted into 4-wheel drive and we found out that the Vacuum lines were switched backwards at the factory on the little manifold thingy on the firewall in the engine compartment.

bradrhale · 08-03-2009, 11:49 AM

im sure he would find this info intersting but the last time he was here........
Last Activity: 02-03-2009 02:51 PM

12-12-2008, 09:33 AM	#1
moparman1992 Junior Member Join Date: Dec 2008 Posts: 4	Problem with 4x4 transfer case engages but front hubs dont any help thanks

12-12-2008, 09:34 AM	#2
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 6,317	the year of the truck would help us out. __________________ i'd rather be hunting

12-12-2008, 10:56 AM	#4
stumpuller454 Senior Member Join Date: Dec 2007 Location: Grande Prairie, AB Posts: 2,042	Look for vacuum leaks....there are miles of vacuum lines on that puppy, common to burn through around engine, or rub through along the crossmember or trans.... __________________ SUPERCHARGED 454 K2500 GMC! 450hp and 600ft/lbs http://www.youtube.com/watch?v=WJ27RJHfJKE "sailing with Captain Morgan often!"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-12-2008, 09:35 AM	#3
moparman1992 Junior Member Join Date: Dec 2008 Posts: 4	sorry about that 1992 dakota

08-03-2009, 11:38 AM	#5
Jim44 Junior Member Join Date: Aug 2009 Location: Nevada Posts: 2	My '92 Dodge W-150 was acting up when I shifted into 4-wheel drive and we found out that the Vacuum lines were switched backwards at the factory on the little manifold thingy on the firewall in the engine compartment.

08-03-2009, 11:49 AM	#6
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 7,831	im sure he would find this info intersting but the last time he was here........ Last Activity: 02-03-2009 02:51 PM