New power booster but still hard to stop - Page 2

leolkfrm · 06-16-2008, 03:59 PM

John, if the pedal was hard to push, when you force the old out it usually gets easier, I'm assuming that you had the engine off for bleeding. If so consider rebleeding the system so you have fresh fluid all the way around. Try slipping a piece of clear plastic hose over the bleeder and into a container so you know its clear

dogbone · 06-17-2008, 08:42 AM

Good idea Leo, thanks, I will do that.
John

dogbone · 06-17-2008, 05:05 PM

I bled the brakes clear but that didn't help. My brakes are kind of here one moment and not here the next. When I tested it on the road they seemed to work ok. I had to apply some pressure at first and then the booster took over. Then out of the blue the next stop was like hardly any brakes. From then on it was a hard pedal with not much help from the booster. I am taking it into the shop and see what they can do.

dogbone · 06-20-2008, 09:24 AM

Dang...my mechanics said the new power booster I bought and installed was bad. The truck is all fixed now. Yahoo!
John

bubbas91lariat · 06-20-2008, 09:43 AM

I dont know much about brakes but im thinkin maybe convert to some bigger rotors. I dont know though. I think i might just leave that to the folks that know what theyre talkin about

z07 · 06-20-2008, 09:48 AM

Congratulations, John. It did sound like a vacuum problem. (Of course I can say that now that the answer is known. :P )

Chevy_Finatic79 · 06-20-2008, 06:08 PM

shake-n-bake bubba shake-n-bake

06-20-2008, 09:43 AM	#15 (permalink)
bubbas91lariat Senior Member Join Date: Dec 2005 Location: Elberton,GA Posts: 825	I dont know much about brakes but im thinkin maybe convert to some bigger rotors. I dont know though. I think i might just leave that to the folks that know what theyre talkin about __________________ IF YOU AINT FIRST YOUR LAST!!!

06-20-2008, 06:08 PM	#17 (permalink)
Chevy_Finatic79 Senior Member Join Date: Mar 2008 Location: Lincoln NE Posts: 439	shake-n-bake bubba shake-n-bake __________________ "She's gonna Freak when she see's my wheels" 85' Chevy C-10 Longbox (Rat) TBI 5.7 Liter/THM350 90' Chevy Suburban 4x4 TBI 350 Cu.In./700R4 http://www.truckforum.org/forums/truck-pictures-176.htm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alpine V-Power Mono Power Amplifier 400 Watts model MRP-M450 with a Type E 12inch Hig	Draggindime8	Truck Classifieds	0	02-20-2008 10:55 AM
O'Reilly Auto Octane booster	rdillon	Chevy Truck Forum	9	11-24-2007 10:02 AM
95 brake booster	mbrown	Chevy Truck Forum	4	04-30-2007 06:13 PM
brake booster	72'CaminoKid	Chevy Truck Forum	0	08-12-2005 08:08 PM
Vacuum truck purchase approved by CN (Jasper Booster)	trucknews	Truck News (headlines)	0	12-02-2004 10:30 AM

06-16-2008, 03:59 PM	#11 (permalink)
leolkfrm Senior Member Join Date: Mar 2008 Location: N.Y. Posts: 656	John, if the pedal was hard to push, when you force the old out it usually gets easier, I'm assuming that you had the engine off for bleeding. If so consider rebleeding the system so you have fresh fluid all the way around. Try slipping a piece of clear plastic hose over the bleeder and into a container so you know its clear

06-17-2008, 08:42 AM	#12 (permalink)
dogbone Full Member Join Date: Mar 2008 Posts: 19	Good idea Leo, thanks, I will do that. John

06-17-2008, 05:05 PM	#13 (permalink)
dogbone Full Member Join Date: Mar 2008 Posts: 19	I bled the brakes clear but that didn't help. My brakes are kind of here one moment and not here the next. When I tested it on the road they seemed to work ok. I had to apply some pressure at first and then the booster took over. Then out of the blue the next stop was like hardly any brakes. From then on it was a hard pedal with not much help from the booster. I am taking it into the shop and see what they can do.

06-20-2008, 09:24 AM	#14 (permalink)
dogbone Full Member Join Date: Mar 2008 Posts: 19	Dang...my mechanics said the new power booster I bought and installed was bad. The truck is all fixed now. Yahoo! John

06-20-2008, 09:48 AM	#16 (permalink)
z07 Senior Member Join Date: Feb 2008 Posts: 176	Congratulations, John. It did sound like a vacuum problem. (Of course I can say that now that the answer is known. :P )