New Headers!

Limited · 10-03-2008, 04:01 PM

So I bought these for my truck a 3 weeks ago and I got them about a week ago! My room mate and I should be putting them in this weekend if all goes right. I'm hiding them from everyone it's just going to be a big surprise. My friend has an Explorer to and ours are pretty even matched in HP but he has better gearing then me so he can pull away a little and that pisses me off...So I bought these and they Dyno tested to add 20 HP to the wheels! I took some pictures of the headers today but I don't feel like uploading the haha so I will show you some pictures from there sit!

I REALLY can't wait! I will keep everyone posted

So make sure you keep checking back

What I'm waiting on now is my room mate needs to put in his new front axle before we can start on my truck so I'm hoping we get to that tonight. He has had a rough day, this ***** he was detailing three work(construction) trucks for "was not happy" with them. They only gave him 3 ours on each truck and he is a one man show. He is the cheapest in town. So they gipped him 380$ because he could not get all the dust out of the crevices like the a air vents and speakers covers...*****...Anyways Keep you updated on my headers!

stumpuller454 · 10-03-2008, 04:03 PM

that should be fun! my headers wern`t to bad 3-4 hours by my self...

Limited · 10-03-2008, 04:20 PM

Quote:

Originally Posted by stumpuller454

that should be fun! my headers wern`t to bad 3-4 hours by my self...

These will be a bit tough just enough room to move around for the passenger side you have to loosen the engine bolts and lift it a bit but oh well I can't wait!

stumpuller454 · 10-03-2008, 07:23 PM

should make the exhaust note alot better, mine sounded WAY better with headers

Limited · 10-03-2008, 08:05 PM

Quote:

Originally Posted by stumpuller454

should make the exhaust note alot better, mine sounded WAY better with headers

Will have a defiant sound improvement!

PS:
Its snowing here up the hill from me at the Flat Top parking lot! Flat Top is a hiking trail up to the top of a MT that it completely flat at the top!

Limited · 10-04-2008, 07:47 PM

Were working on them as we speak!

Limited · 10-07-2008, 01:40 AM

OK EVERY ONE THIS IS ALL WHAT YOU HAVE BEEN WAITING FOR!

MY HEADERS ARE ON!

10/4/08 is when I got them all done!

+20 HP to the ground! Tomorrow morning I'm going to see a buddy might be getting my exhaust done depends on if I'm feeling open and crazy or greedy with money at 9am!

stumpuller454 · 10-07-2008, 08:21 AM

WOW that looks crazt tight, i`da been swearing alot for sure!!!

Limited · 10-07-2008, 10:15 AM

Quote:

Originally Posted by stumpuller454

WOW that looks crazt tight, i`da been swearing alot for sure!!!

My room mate was the one mostly putting them in just because I can't with my body and arm blah blah blah but I did what I could. Oh man! He was yelling and screaming at it half the time.

Passenger side: You had to loosen the engine mounting brackets and lift the engine 2" to get the header to fit

Crazy Crazy two day!

Limited · 10-07-2008, 02:41 PM

My truck is down at my buddies shop right now getting a FlowMaster 40 Sierras but on and he is taking the resignator(sp) off...

10-03-2008, 04:01 PM	#1
Limited Senior Member Join Date: Sep 2008 Location: Anchorage, Alaska Posts: 232	New Headers! So I bought these for my truck a 3 weeks ago and I got them about a week ago! My room mate and I should be putting them in this weekend if all goes right. I'm hiding them from everyone it's just going to be a big surprise. My friend has an Explorer to and ours are pretty even matched in HP but he has better gearing then me so he can pull away a little and that pisses me off...So I bought these and they Dyno tested to add 20 HP to the wheels! I took some pictures of the headers today but I don't feel like uploading the haha so I will show you some pictures from there sit! I REALLY can't wait! I will keep everyone posted So make sure you keep checking back What I'm waiting on now is my room mate needs to put in his new front axle before we can start on my truck so I'm hoping we get to that tonight. He has had a rough day, this *** he was detailing three work(construction) trucks for "was not happy" with them. They only gave him 3 ours on each truck and he is a one man show. He is the cheapest in town. So they gipped him 380$ because he could not get all the dust out of the crevices like the a air vents and speakers covers...*...Anyways Keep you updated on my headers! __________________ Danny-Explorer Limited** V8 Now: 245HP(air intake, TMH headers, exhaust) Soon: 260HP(tune)

10-03-2008, 04:03 PM	#2
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 786	that should be fun! my headers wern`t to bad 3-4 hours by my self... __________________ 1998 GMC K2500 Ext.cab short box 454ci *1951 Chevrolet 1420 pickup like new!* Red seal certified Journeyman Automotive Mechanic

10-03-2008, 07:23 PM	#4
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 786	should make the exhaust note alot better, mine sounded WAY better with headers __________________ 1998 GMC K2500 Ext.cab short box 454ci *1951 Chevrolet 1420 pickup like new!* Red seal certified Journeyman Automotive Mechanic

10-04-2008, 07:47 PM	#6
Limited Senior Member Join Date: Sep 2008 Location: Anchorage, Alaska Posts: 232	Were working on them as we speak! __________________ Danny-Explorer Limited V8 Now: 245HP(air intake, TMH headers, exhaust) Soon: 260HP(tune)

10-07-2008, 01:40 AM	#7
Limited Senior Member Join Date: Sep 2008 Location: Anchorage, Alaska Posts: 232	OK EVERY ONE THIS IS ALL WHAT YOU HAVE BEEN WAITING FOR! MY HEADERS ARE ON! 10/4/08 is when I got them all done! +20 HP to the ground! Tomorrow morning I'm going to see a buddy might be getting my exhaust done depends on if I'm feeling open and crazy or greedy with money at 9am! __________________ Danny-Explorer Limited V8 Now: 245HP(air intake, TMH headers, exhaust) Soon: 260HP(tune)

10-07-2008, 08:21 AM	#8
stumpuller454 Senior Member Join Date: Dec 2007 Location: Alberta Posts: 786	WOW that looks crazt tight, i`da been swearing alot for sure!!! __________________ 1998 GMC K2500 Ext.cab short box 454ci *1951 Chevrolet 1420 pickup like new!* Red seal certified Journeyman Automotive Mechanic

10-07-2008, 02:41 PM	#10
Limited Senior Member Join Date: Sep 2008 Location: Anchorage, Alaska Posts: 232	My truck is down at my buddies shop right now getting a FlowMaster 40 Sierras but on and he is taking the resignator(sp) off... __________________ Danny-Explorer Limited V8 Now: 245HP(air intake, TMH headers, exhaust) Soon: 260HP(tune)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
headers	price	Chevy Truck Forum	2	08-22-2008 06:32 AM
Headers	gmctrucks	GMC Truck Forum	4	04-23-2008 12:00 AM
Headers	97SierraStepSde	General Truck Forum	9	10-04-2007 07:14 AM
will these headers fit	strokn50	Toyota Truck Forum	2	06-30-2007 12:03 AM
headers	95'sierra	GMC Truck Forum	0	04-07-2005 06:22 PM