Help!

uranium67 · 06-13-2009, 01:53 PM

I recently bought an np435 for my 292, but the bolt pattern for the bell housing i have is wrong

is there any way to get it to fit? I really dont want to have to hunt down another transmission.

andersonxxl · 06-13-2009, 03:29 PM

Complete NP435 Transmission Packages

this might help you out.

uranium67 · 06-13-2009, 07:02 PM

well, i was hoping for a place that may have a price range so i could estimate how much money to get. I know Np435 trannys are great, i just need some way of bolting it up to my 292 engine with a proper bell housing

72'CaminoKid · 06-13-2009, 11:33 PM

try advance adapters, alot of jeep people use this place when dropping a 350 in

uranium67 · 06-14-2009, 12:35 AM

Got a place in mind where i can find one for a decent price?

andersonxxl · 06-18-2009, 09:30 PM

i would be suprised if summit racing doesnt have anything. they've got one for everything else.

semocoachworks · 06-19-2009, 06:18 PM

I have a 64 f250 4x4 with the 4speed and divorced t-case. I am going to put a 351c and c-6 in it. Could you use any of the old parts I'm going to have? I'll have the tranny, bellhousing, clutch, flywheel, pressure plate, throwout bearing, that are all in good shape and I drive this truck almost daily.

bradrhale · 06-19-2009, 08:24 PM

you sure that you want to give up that clev and c6 so easily?? is that a 2v or 4v clev?? might be interested.

semocoachworks · 06-19-2009, 09:10 PM

I'm actually putting the cleveland/c-6 combo in this old truck. The 292 runs good but I want a little more. I would probably make this a daily work driver if I get the engine/tranny combo in. It's got 4.56 gears in it now and a dana 60 rear. I was really thinking I would put a corp 14 bolt chevy rear in it and change to 4.10's for the highway.

bradrhale · 06-20-2009, 02:14 PM

had that same combo and loved it. dude drank gas like a fish in water, but was a blast with the extra power the clev was pushing. dont know if i would own another one but if i had the means of say...... Jay Leno, than yeah. i would want a couple. as it is now, i am looking at buying another truck. found a 85 datsun, nissan, really dont know what they called them back then, for 800. new clutch, tires, american racing wheels, mirrors, lights. might be a deal if the woman would come back home so i could talk to her.

06-13-2009, 01:53 PM	#1
uranium67 Senior Member Join Date: Feb 2009 Location: Good ol' San Diego Posts: 89	Help! I recently bought an np435 for my 292, but the bolt pattern for the bell housing i have is wrong is there any way to get it to fit? I really dont want to have to hunt down another transmission.

06-13-2009, 03:29 PM	#2
andersonxxl Full Member Join Date: Mar 2008 Location: NY Posts: 43	Complete NP435 Transmission Packages this might help you out. __________________ Smoke 'Em If You Got 'Em

06-13-2009, 11:33 PM	#4
72'CaminoKid Senior Member Join Date: Jun 2005 Posts: 2,756	try advance adapters, alot of jeep people use this place when dropping a 350 in __________________ 99 suburban xlt 96 silverado 91 wrangler (my baby ) 08 Honday shadow 750 (my mistress)

06-18-2009, 09:30 PM	#6
andersonxxl Full Member Join Date: Mar 2008 Location: NY Posts: 43	i would be suprised if summit racing doesnt have anything. they've got one for everything else. __________________ Smoke 'Em If You Got 'Em

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-13-2009, 07:02 PM	#3
uranium67 Senior Member Join Date: Feb 2009 Location: Good ol' San Diego Posts: 89	well, i was hoping for a place that may have a price range so i could estimate how much money to get. I know Np435 trannys are great, i just need some way of bolting it up to my 292 engine with a proper bell housing

06-14-2009, 12:35 AM	#5
uranium67 Senior Member Join Date: Feb 2009 Location: Good ol' San Diego Posts: 89	Got a place in mind where i can find one for a decent price?

06-19-2009, 06:18 PM	#7
semocoachworks Senior Member Join Date: May 2009 Location: rapid city, sd Posts: 420	I have a 64 f250 4x4 with the 4speed and divorced t-case. I am going to put a 351c and c-6 in it. Could you use any of the old parts I'm going to have? I'll have the tranny, bellhousing, clutch, flywheel, pressure plate, throwout bearing, that are all in good shape and I drive this truck almost daily.

06-19-2009, 08:24 PM	#8
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,014	you sure that you want to give up that clev and c6 so easily?? is that a 2v or 4v clev?? might be interested.

06-19-2009, 09:10 PM	#9
semocoachworks Senior Member Join Date: May 2009 Location: rapid city, sd Posts: 420	I'm actually putting the cleveland/c-6 combo in this old truck. The 292 runs good but I want a little more. I would probably make this a daily work driver if I get the engine/tranny combo in. It's got 4.56 gears in it now and a dana 60 rear. I was really thinking I would put a corp 14 bolt chevy rear in it and change to 4.10's for the highway.

06-20-2009, 02:14 PM	#10
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,014	had that same combo and loved it. dude drank gas like a fish in water, but was a blast with the extra power the clev was pushing. dont know if i would own another one but if i had the means of say...... Jay Leno, than yeah. i would want a couple. as it is now, i am looking at buying another truck. found a 85 datsun, nissan, really dont know what they called them back then, for 800. new clutch, tires, american racing wheels, mirrors, lights. might be a deal if the woman would come back home so i could talk to her.