351 with hole in enigne - Page 2

gmctrucks · 07-31-2009, 09:08 PM

That's what I would do remove the pan like 75K30 said he knows what he's talking about and check that pump go that route and like Leo stated JB weld that bad boy or weld it closed.
Good luck! GMC

460dually · 08-01-2009, 09:49 AM

thanks for the advice and help guys i dont think the oil pump or dizzy is bad the truck only ran for a min after that happened i had changed the oil and had the valve cover off and seen oil pumping to the top but it wasnt long before the oil was thin again maybe a min im going to go ahead and inspect it anyways to be sure

leolkfrm · 08-01-2009, 09:03 PM

don't forget to check the pump as 75 mentioned....i remember when the block mounted chevy's would do it

460dually · 08-03-2009, 10:36 AM

i forgot to mention that i did change the fuel pump right after this happened cause thats what i thought it was too, changed the oil started it up and let it run and the oil was thinned out again in a few min, towed it home and now she sits lol. Any other way gas could get into the oil?

FredF100 · 11-03-2009, 12:24 PM

If it's not structural JB Weld but yo have to find out what did it, I am in michigan and taking a 351M and 400 to the recycle for scrap craig's list couldnt get rid of them

08-01-2009, 09:03 PM	#13
leolkfrm Senior Member Join Date: Mar 2008 Location: N.Y. Posts: 4,300	don't forget to check the pump as 75 mentioned....i remember when the block mounted chevy's would do it __________________ 4 wheels move the body 2 wheels move the soul B.W.A.I

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB 16" 6 hole gm wheel	Sneakysportsman	Truck Classifieds	3	02-25-2009 07:31 PM
Drilling hole in the firewall...	Mikes96Z71	Chevy Truck Forum	5	01-24-2009 12:21 AM
weep hole	adrnmrnda	Chevy Truck Forum	3	06-01-2008 06:48 PM
HELP-pin hole in gas tank	tims84k10	Chevy Truck Forum	1	11-13-2007 10:47 PM
Hole in the hood. How can i patch it up?	bubbas91lariat	Ford Truck Forum	12	07-21-2007 02:48 PM

07-31-2009, 09:08 PM	#11
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 4,035	That's what I would do remove the pan like 75K30 said he knows what he's talking about and check that pump go that route and like Leo stated JB weld that bad boy or weld it closed. Good luck! GMC

08-01-2009, 09:49 AM	#12
460dually Full Member Join Date: Jul 2009 Posts: 11	thanks for the advice and help guys i dont think the oil pump or dizzy is bad the truck only ran for a min after that happened i had changed the oil and had the valve cover off and seen oil pumping to the top but it wasnt long before the oil was thin again maybe a min im going to go ahead and inspect it anyways to be sure

08-03-2009, 10:36 AM	#14
460dually Full Member Join Date: Jul 2009 Posts: 11	i forgot to mention that i did change the fuel pump right after this happened cause thats what i thought it was too, changed the oil started it up and let it run and the oil was thinned out again in a few min, towed it home and now she sits lol. Any other way gas could get into the oil?

11-03-2009, 12:24 PM	#15
FredF100 Full Member Join Date: Nov 2008 Location: Lapeer, Michigan Posts: 12	If it's not structural JB Weld but yo have to find out what did it, I am in michigan and taking a 351M and 400 to the recycle for scrap craig's list couldnt get rid of them