clutch help needed

CATFISHMO · 06-24-2006, 02:25 PM

i have a 1984 bronco II 2.8 4spd , 3 in. body lift.my queston is what would be the best clutch. its a daily driver and offroader. i put a new zoom clutch in it and it slips in 3 inch's of mud.tired of getting stuck . can someone help me please . any and all comments will be helpful

390FE · 07-03-2006, 12:31 PM

Neaver heard of "zoom"
I'd just stick with a centerforce. I beleve there stage one is better than the factory one.

you might have somthing else wrong if your clutch is slippign when in the mud. Mud shouldn't be getting into the tranny and clutch area... Mud dirt and friction plates don't get along together so well..

02F2504x4 · 07-10-2006, 08:04 PM

Check your flywheel could be bad like mine on my 1988 BMW 528E I pulled the tranny today and saw alot more problems than what I thought I had... My fly wheel is a two peace spring loaded... ;\ That could cause slipping even though you have a new clutch and leaks inside your tranny also can cause slipping.

06-24-2006, 02:25 PM	#1
CATFISHMO Junior Member Join Date: Jun 2006 Posts: 1	clutch help needed i have a 1984 bronco II 2.8 4spd , 3 in. body lift.my queston is what would be the best clutch. its a daily driver and offroader. i put a new zoom clutch in it and it slips in 3 inch's of mud.tired of getting stuck . can someone help me please . any and all comments will be helpful Last edited by CATFISHMO; 06-26-2006 at 04:51 AM.

07-03-2006, 12:31 PM	#2
390FE Senior Member Join Date: Sep 2005 Location: S. NH Posts: 336	Neaver heard of "zoom" I'd just stick with a centerforce. I beleve there stage one is better than the factory one. you might have somthing else wrong if your clutch is slippign when in the mud. Mud shouldn't be getting into the tranny and clutch area... Mud dirt and friction plates don't get along together so well.. __________________ 87 Toyota 4x4 -- 72 F250 -- 68 F250 -- A Ford kah -- New to Family is 07 Ranger FX4

07-10-2006, 08:04 PM	#3
02F2504x4 Senior Member Join Date: Jan 2006 Location: Cali Posts: 88	Check your flywheel could be bad like mine on my 1988 BMW 528E I pulled the tranny today and saw alot more problems than what I thought I had... My fly wheel is a two peace spring loaded... ;\ That could cause slipping even though you have a new clutch and leaks inside your tranny also can cause slipping. __________________ 2002 F-250 4x4 CC 7.3L DIESEL Mods Edge Evo Edge Juice W/ Attitude 4 Inch Turbo Back Exhaust Straight Pipe DIY Tymar Intake Foil Delete Recon Light Strip

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help on Mazda Truck Clutch	stina3246	Mazda Truck Forum	11	03-11-2006 09:40 AM
clutch bleeding	72'CaminoKid	Ford Truck Forum	6	11-28-2005 09:42 PM
clutch in a f-250	s10owner	Ford Truck Forum	5	03-25-2005 03:00 PM
STRAIGHT TRUCK DRIVERS NEEDED (Gaston Gazette)	trucknews	Truck News (headlines)	0	11-05-2004 06:30 AM
STRAIGHT TRUCK DRIVERS NEEDED (The Gaston Gazette Homepage)	trucknews	Truck News (headlines)	0	11-05-2004 04:30 AM