engine swap - Page 3

mudseeker · 10-28-2009, 10:07 PM

Quote:

Originally Posted by rollinon44s

where do i post a thread at! like a new one! i need help on something!

the same way you post a reply. just click on chevy, ford, dodge or whatever forum you want it to be in.

mudseeker · 11-04-2009, 10:09 PM

no sawzall but there was a torch.

hotrodpc · 11-04-2009, 10:38 PM

Good Night Astro Van!!! May your RIP !!!

And may your dontated organs be put to good use for a long time.

mudseeker · 11-04-2009, 10:51 PM

blazer is getting the engine, trans is being sold, front seats are going in my red truck, then it's off to the bone yard for the next person.

bradrhale · 11-05-2009, 06:58 AM

was that you doing all that cutting?? i forget what its like to sit like that on your knees and stil lhave the ability just to bounce up. there is a point where you kind of have to roll to one side before standing. thats asuming that you can stay in that position before the joints start hurting so bad that you just want to lay down.

mudseeker · 11-05-2009, 09:29 AM

no! are you nuts? i can't sit like that, my knees pop just from standing up from sitting in a computer chair.

the guy doing the cutting used to be a boiler maker so i let him do the honors.

Crmzendrgone · 11-05-2009, 09:45 AM

Quote:

Originally Posted by hotrodpc

Good Night Astro Van!!! May your RIP !!! And may your dontated organs be put to good use for a long time.

NO WAIT IT'S LICENSE SAID NO UNDER ORGAN DONOR!!!!

Quote:

Originally Posted by bradrhale

was that you doing all that cutting?? i forget what its like to sit like that on your knees and stil lhave the ability just to bounce up. there is a point where you kind of have to roll to one side before standing. thats asuming that you can stay in that position before the joints start hurting so bad that you just want to lay down.

Oh you too huh. I hate it. I can't even sit like that for a second, ok maybe two second without them KILLING me.

Quote:

Originally Posted by mudseeker

no! are you nuts? i can't sit like that, my knees pop just from standing up from sitting in a computer chair. the guy doing the cutting used to be a boiler maker so i let him do the honors.

Yours pop. My sound like rice crispies then I limp for a few seconds afterwards.
HOW OLD ARE WE??? My knees tell me I am 75+

Crmzendrgone · 11-05-2009, 09:50 AM

What is this thingy here?

mudseeker · 11-05-2009, 09:52 AM

the black blob is the cutting torch blanket and the handle is for the floor jack holding the back end up.

Crmzendrgone · 11-05-2009, 10:07 AM

Quote:

Originally Posted by mudseeker

the black blob is the cutting torch blanket and the handle is for the floor jack holding the back end up.

Oh I thought and I knew better but I thought it was a "rear drive transmission

" if that makes sense. Like what the Plymouth Prowlers have.

11-04-2009, 10:09 PM	#22
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 6,374	no sawzall but there was a torch. __________________ i'd rather be hunting

11-04-2009, 10:38 PM	#23
hotrodpc Senior Member Join Date: Jul 2008 Location: OKC, OK Posts: 3,149	Good Night Astro Van!!! May your RIP !!! And may your dontated organs be put to good use for a long time. __________________ *Winners NEVER Quit , Quitters NEVER Win !!!*

11-04-2009, 10:51 PM	#24
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 6,374	blazer is getting the engine, trans is being sold, front seats are going in my red truck, then it's off to the bone yard for the next person. __________________ i'd rather be hunting

11-05-2009, 09:29 AM	#26
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 6,374	no! are you nuts? i can't sit like that, my knees pop just from standing up from sitting in a computer chair. the guy doing the cutting used to be a boiler maker so i let him do the honors. __________________ i'd rather be hunting

11-05-2009, 09:50 AM	#28
Crmzendrgone Senior Member Join Date: Apr 2009 Location: Arizona Posts: 1,420	What is this thingy here? __________________ ENGINES PRODUCE POWER. MOTORS RECEIVE POWER. https://lastroundbestround.com/Home_Page.html

11-05-2009, 06:58 AM	#25
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,025	was that you doing all that cutting?? i forget what its like to sit like that on your knees and stil lhave the ability just to bounce up. there is a point where you kind of have to roll to one side before standing. thats asuming that you can stay in that position before the joints start hurting so bad that you just want to lay down.

11-05-2009, 09:52 AM	#29
mudseeker Senior Moderator Join Date: Feb 2006 Location: michigan Posts: 6,374	the black blob is the cutting torch blanket and the handle is for the floor jack holding the back end up. __________________ i'd rather be hunting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine swap	monkeysport2k4	Chevy Truck Forum	3	08-17-2009 09:20 PM
5.3 engine swap?	ghost4570	Chevy Truck Forum	0	08-15-2009 05:40 PM
engine swap	bikernut	Chevy Truck Forum	5	08-12-2009 09:52 PM
6 for 8 engine swap	coltstrader	Dodge Truck Forum	5	02-17-2009 04:12 PM
Engine swap	AndyinCt.	Chevy Truck Forum	5	07-01-2008 08:28 PM