![]() | ![]() |
| | #1 |
| Junior Member Join Date: Mar 2008
Posts: 9
| New 08 Lift This is my first GM product. 2008 1500 reg cab Z-71 4x4.I have always had 1 ton fords, I was wondering if anyone has had any experiance with a 2.5 leveling kit. I did a search on this and noticed that the older models have some kind of torsion keys and the 08's use a spacer on top of the springs. Does this cause as much of a problem as the torsion keys? Also does anyone have any photos of their `08 truck with a leveling kit. I have to get this thing up, it looks like a 2 wheel drive! I`ve never had a coil spring truck,always leaf springs in the front, and a leveling kit didnt hurt anything. Any help would be nice. Thanks, Jeremy |
| | |
| | #2 |
| Full Member Join Date: Jul 2006 Location: Adirondacks, New York
Posts: 41
| Ready lift makes a leveling kit. I thought about putting one on my 02 1500 HD, but then changed my mind. I have a 07 GMC 2500 HD. It sits just as high as the Dodges or Fords in the rear and pretty close in the front. The reason I decided NOT to go with a leveling kit is this.... ....... when I do tow a "HEAVY" load, the trucks rear settles a bit and the truck rides level. Every Ford that I see with a "HEAVY" load looks like it is doing a wheelie down the highway. This is why the GM trucks are designed this way. That being said, if you want a leveling kit, go to this sight. Suspension Leveling and Lift kits by ReadyLift |
| | |
| | #3 |
| Junior Member Join Date: Mar 2008
Posts: 9
| Yeah thanks I noticed on ebay you can get the same thing for around $100. I am still trying to decide what to do. |
| | |
| | #4 |
| Banned Join Date: Mar 2008 Location: levittown pa
Posts: 2,197
| do not go with a leveling kit of ebay for that price. you will get poor quality stuff that if you do anykind of offroading or even hit the right pot hole it is broke. i got a lift kit for my bronco when i still had it and it lasted about a week before i saw cracks in the rear blocks and took it off and sent it back for a refund. suspension stuff off ebay is garbage |
| | |
| | #5 | |
| Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania.
Posts: 3,170
| Quote:
__________________ The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead! ![]() | |
| | |
| | #6 |
| Senior Member Join Date: Dec 2006 Location: jax,fl
Posts: 1,196
| i got a 3" lift off ebay and no problems. but it is also made by rough country too. there was no diff. between fab-tech that everyone says to get or sell me for more money to the rough country. witch i have heard of both so i went with it
__________________ A dirty mind is a terrible thing to waste! |
| | |
| | #7 |
| Full Member Join Date: Feb 2008
Posts: 14
| Rancho looks to have a nice lift(level) option for the 08.. my .02cts |
| | |
| | #8 |
| Junior Member Join Date: Mar 2008
Posts: 9
| Thanks for all the info. I really like the rancho lift, alil pricy but its nice. I just had flowmaster exhaust installed yesterday and it sounds good until the engine goes into 4V mode, then it sounds like its skipping. You couldnt here it with the stock exhaust but with louder pipes it is very noticeable. |
| | |
| Thread Tools | Search this Thread |
|
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| need brackets to lift bull bar due to body lift | chevyman_03 | Chevy Truck Forum | 5 | 12-28-2007 07:09 PM |
| lift: | 1bj | Nissan Truck Forum | 1 | 06-30-2007 01:46 PM |
| Lift gone bad, What not to do! | chevyguy | General Truck Forum | 6 | 11-22-2006 10:31 PM |
| 97 F-250 lift | wmiller | Ford Truck Forum | 2 | 10-02-2006 04:58 PM |
| help with lift kit | nshoghead99 | Toyota Truck Forum | 2 | 09-27-2006 04:33 AM |