89 gmc help plz - Page 2

snider777 · 10-12-2009, 05:58 PM

ok. but will one of these work?

bradrhale · 10-12-2009, 07:45 PM

delphi is a good brand and i have heard of bestest pumps before and have been told that they are excellent.

snider777 · 10-12-2009, 09:23 PM

will it work on my truck though??? can i install it and it will work? ethier one?

BernieB · 10-12-2009, 09:26 PM

Quote:

Originally Posted by snider777

will it work on my truck though??? can i install it and it will work? ethier one?

Either company should have a model that will fit your truck. You just need to check their catalogs and find what stock # you need to buy.

snider777 · 10-12-2009, 09:30 PM

ok.. also is it easier to lift the bed up or get under and do it? if its better to lift bed up anyone know how?

BernieB · 10-12-2009, 09:44 PM

Lifting the bed is the easy way. Remove the bolts on the drivers side and only loosen the ones on the passenger side, then just tilt it up and block it in place.

gmctrucks · 10-13-2009, 03:24 AM

I say make sure there going to be rated at the correct fuel pressure for your truck. Your also going to have to remove the screws from the gas tube neck it's easy and a ground wire. Go with Delphi look how long the one you have lasted.

snider777 · 10-16-2009, 11:48 AM

i got bed off. easy way to do the pump?? twist and take out or what? im buying new wires the pump and a strainer?? easy steps please? lol should i see if i can hear the pump first? before i take it out

snider777 · 10-16-2009, 11:49 AM

also my gas gauge shows full all the time?? anything i can do while the bed is off

leolkfrm · 10-16-2009, 02:47 PM

I would have thought you would confirm a bad pump before lifting the bed????

10-12-2009, 09:44 PM	#16
BernieB Senior Member Join Date: Jul 2009 Location: Fredericksburg, VA Posts: 1,901	Lifting the bed is the easy way. Remove the bolts on the drivers side and only loosen the ones on the passenger side, then just tilt it up and block it in place. __________________ If the guys who design 'em had to take one home, use it every day for 2 years, and do all the maint and repairs themselves, cars would have a button on the dash to change the oil, filters & plugs.

10-16-2009, 11:48 AM	#18
snider777 Full Member Join Date: Oct 2009 Posts: 26	hhehehe i got bed off. easy way to do the pump?? twist and take out or what? im buying new wires the pump and a strainer?? easy steps please? lol should i see if i can hear the pump first? before i take it out

10-16-2009, 02:47 PM	#20
leolkfrm Senior Member Join Date: Mar 2008 Location: N.Y. Posts: 4,300	I would have thought you would confirm a bad pump before lifting the bed???? __________________ 4 wheels move the body 2 wheels move the soul B.W.A.I

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-12-2009, 05:58 PM	#11
snider777 Full Member Join Date: Oct 2009 Posts: 26	ok. but will one of these work?

10-12-2009, 07:45 PM	#12
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,021	delphi is a good brand and i have heard of bestest pumps before and have been told that they are excellent.

10-12-2009, 09:23 PM	#13
snider777 Full Member Join Date: Oct 2009 Posts: 26	will it work on my truck though??? can i install it and it will work? ethier one?

10-12-2009, 09:30 PM	#15
snider777 Full Member Join Date: Oct 2009 Posts: 26	ok.. also is it easier to lift the bed up or get under and do it? if its better to lift bed up anyone know how?

10-13-2009, 03:24 AM	#17
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 4,030	I say make sure there going to be rated at the correct fuel pressure for your truck. Your also going to have to remove the screws from the gas tube neck it's easy and a ground wire. Go with Delphi look how long the one you have lasted.

10-16-2009, 11:49 AM	#19
snider777 Full Member Join Date: Oct 2009 Posts: 26	also my gas gauge shows full all the time?? anything i can do while the bed is off