| | |
12-30-2005, 12:17 PM
| #1 |
| Junior Member Join Date: Dec 2005
Posts: 3
 | Stalling I got a 86' GMC pickup shortbox 4*4, i just put a new 350 into it and changed the transmission filter and keep it filled reguarlly and filled torque converter with oil before put in. It now has 1200miles on the motor and when it starts up it sits and idle fine but when u put into gear it stalls immeditally. If u drop it in first while hammering th egas it willl move hwenu hammer it agian but soons u slow down it stops. When you do get it moving it hessitates bad to drop a gear and when you let off the gas it sorta jolts the truck from the tranny ,,, would you say its pretty much shot, or the torque converter needs adjusted? theres 125k on tranny and i belive its been rebuilt once. |
|  |
|
12-30-2005, 05:21 PM
| #2 |
| Senior Member  Join Date: Sep 2005 Location: ALABAMA
Posts: 3,160
 | Yip, I have seen this before, To avoid a lengthy discussion, It is time for a transmission shop for a rebuild
__________________ When i die, i dont want to walk gracefully thu the pearly gates and turn in a unused body. i want to go sliding thru sideways and turn in a body that has been completely used up. |
|
| |
|
12-31-2005, 09:33 AM
| #3 |
| Junior Member Join Date: Dec 2005
Posts: 3
| Oh thank you chevy guy ive been looking around here for a while in my town and i found a shop that would build a t400 for me with a shiftkit and all that good stuff, thanks fo rthe reply |
|
| |
 |
| Thread Tools | Search this Thread |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GMC Canyon Stalling? | nrhode6778 | GMC Truck Forum | 2 | 06-29-2005 03:48 PM |
