Needing a 3:42 4X4 rearend

jy95supra · 11-27-2006, 04:01 PM

i am looking for someone who has a 1990 to 1995 GMC sierra, K1500, 1/2ton, 4X4, 3:42 rear end for sale around $400 total and can ship it to Indianapolis, IN; 46201. please email me at jy95supra@yahoo.com. thanks for looking for a rear end for me.

bradrhale · 11-28-2006, 07:54 AM

a complete rearend plus shipping for 400?? best of luck to you. go to a junk yard.

nate3436 · 11-30-2006, 07:13 PM

I had to replace a 3.42 rearend 3 times and finally found it was cheaper to switch to 3.73's in the front and rear from 4wheelparts.com. They will last alot longer too. 3.42 is a light duty gear and if you do any pulling or work with your truck you'll love them. Think it cost me $452.00 for ring and pinions and install kits with bearings and shims for front and rear. And it wasn't as bad as everyone says to change them out and dealing with backlash and the crush sleeve spacing.

gmctrucks · 11-30-2006, 08:14 PM

Remember you don't need to replace with rear gm locker, open will be less money hope this helps you find a good one inspect before you buy one.

11-27-2006, 04:01 PM	#1
jy95supra Junior Member Join Date: Nov 2006 Posts: 1	Needing a 3:42 4X4 rearend i am looking for someone who has a 1990 to 1995 GMC sierra, K1500, 1/2ton, 4X4, 3:42 rear end for sale around $400 total and can ship it to Indianapolis, IN; 46201. please email me at jy95supra@yahoo.com. thanks for looking for a rear end for me.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie needing help	wendt32	GMC Truck Forum	2	05-27-2007 05:25 PM
91' gmc 2wd rearend question	deion82	GMC Truck Forum	1	09-02-2006 09:59 PM
straps that hold the universal to the rearend	jchcomputers	Chevy Truck Forum	1	02-06-2006 06:41 PM
WTB 3.23 rearend gears	88 gtu	GMC Truck Forum	11	11-28-2005 09:48 PM

11-28-2006, 07:54 AM	#2
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 9,515	a complete rearend plus shipping for 400?? best of luck to you. go to a junk yard.

11-30-2006, 07:13 PM	#3
nate3436 Senior Member Join Date: Jan 2006 Location: Southeast Iowa Posts: 51	I had to replace a 3.42 rearend 3 times and finally found it was cheaper to switch to 3.73's in the front and rear from 4wheelparts.com. They will last alot longer too. 3.42 is a light duty gear and if you do any pulling or work with your truck you'll love them. Think it cost me $452.00 for ring and pinions and install kits with bearings and shims for front and rear. And it wasn't as bad as everyone says to change them out and dealing with backlash and the crush sleeve spacing.

11-30-2006, 08:14 PM	#4
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 4,645	Remember you don't need to replace with rear gm locker, open will be less money hope this helps you find a good one inspect before you buy one.