B4000 Aftermarket Bumpers? - Page 2

93blazer · 10-08-2008, 01:28 AM

yea ive used both and there great companys the s10 pickup in my pics all that came from there that truck that truck is bagged front and rear with a blow through through the bed and cab wall housing three 15s i need to get some more pics of that one

SMH · 10-08-2008, 07:46 PM

1999 Ford Ranger Car Body Parts - Found Products

I can find everything I need here if I can verify that 1999 Ranger stuff will fit. Does anyone know for sure? These people have great prices and have it all in stock just not sure if it will bolt on.

junior3382 · 10-08-2008, 07:59 PM

Everything from the Ranger and the Mazda rare 100% interchangable with the only exceptions being the emblems, the Ranger grill mesh, the steering wheel and the Clutch on the manuals... don't ask me why...lol... I learned that the hard way. If the motor is stamped FORD, do NOT buy the Mazda clutch... it will NOT work...lol.... Other then that, until 2001, everything was interchangable.

SMH · 10-08-2008, 08:16 PM

OK If you say so I will try it. That will solve alot of my problems if you are right.
Thanks

SMH · 10-08-2008, 08:17 PM

Not sure why they dont just list it for Mazda also if they are the same.

junior3382 · 10-08-2008, 08:30 PM

some sites do. But oddly, if you go to autozone and ask for sway bar endlinks for the Mazda, they do NOT have a listing and say they do not exists, and the truck does not have them. I brought them in, held them in my hand, and he still told me I was wrong. But look it up for the Ranger and pop, right there, grabbed the box and they were EXACTLY what I was holding in my hand. The programs should be updated to include the matches, but unfirtuanately, they are not.

Another example, if you go to a MAzda dealership to order a factory replacement Cat system, it will cost you 1800 bucks for the mazda parts, go to Ford, they will be all but 1100 for the same parts, I thought that was funny as hel. And those guys will admit they are exactly the same. Again, it is an anomoly, but reality. Good luck bud.

junior3382 · 10-08-2008, 08:31 PM

I was also thinking, just to be on the safe side, make sure the site offers a fair retunr policy, just incase whatever you order in the futre would not work, but I seriuously do not think you will need it.

10-08-2008, 01:28 AM	#11
93blazer Senior Member Join Date: Oct 2008 Location: south BAMA Posts: 284	yea ive used both and there great companys the s10 pickup in my pics all that came from there that truck that truck is bagged front and rear with a blow through through the bed and cab wall housing three 15s i need to get some more pics of that one __________________ IF YOU AIN'T FIRST YOUR LAST SHAKE AND BAKE !!!!!!!!

10-08-2008, 07:59 PM	#13
junior3382 Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania. Posts: 3,170	Everything from the Ranger and the Mazda rare 100% interchangable with the only exceptions being the emblems, the Ranger grill mesh, the steering wheel and the Clutch on the manuals... don't ask me why...lol... I learned that the hard way. If the motor is stamped FORD, do NOT buy the Mazda clutch... it will NOT work...lol.... Other then that, until 2001, everything was interchangable. __________________ *The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead!*

10-08-2008, 08:30 PM	#16
junior3382 Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania. Posts: 3,170	some sites do. But oddly, if you go to autozone and ask for sway bar endlinks for the Mazda, they do NOT have a listing and say they do not exists, and the truck does not have them. I brought them in, held them in my hand, and he still told me I was wrong. But look it up for the Ranger and pop, right there, grabbed the box and they were EXACTLY what I was holding in my hand. The programs should be updated to include the matches, but unfirtuanately, they are not. Another example, if you go to a MAzda dealership to order a factory replacement Cat system, it will cost you 1800 bucks for the mazda parts, go to Ford, they will be all but 1100 for the same parts, I thought that was funny as hel. And those guys will admit they are exactly the same. Again, it is an anomoly, but reality. Good luck bud. __________________ *The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead!*

10-08-2008, 08:31 PM	#17
junior3382 Senior Member Join Date: Mar 2007 Location: Currently, I live in Lancaster county, Pennsylvania. Posts: 3,170	I was also thinking, just to be on the safe side, make sure the site offers a fair retunr policy, just incase whatever you order in the futre would not work, but I seriuously do not think you will need it. __________________ *The Blazer is dead, so I pumped her with lead, laid her to bed, and bought a FORD instead!*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-08-2008, 07:46 PM	#12
SMH Junior Member Join Date: Oct 2008 Posts: 8	1999 Ford Ranger Car Body Parts - Found Products I can find everything I need here if I can verify that 1999 Ranger stuff will fit. Does anyone know for sure? These people have great prices and have it all in stock just not sure if it will bolt on.

10-08-2008, 08:16 PM	#14
SMH Junior Member Join Date: Oct 2008 Posts: 8	OK If you say so I will try it. That will solve alot of my problems if you are right. Thanks

10-08-2008, 08:17 PM	#15
SMH Junior Member Join Date: Oct 2008 Posts: 8	Not sure why they dont just list it for Mazda also if they are the same.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is a good Aftermarket exhaust	akpow	Chevy Truck Forum	19	01-23-2009 11:41 PM
99 B4000 4X4 Bumper interchange?	SMH	Mazda Truck Forum	4	10-02-2008 09:39 PM
B4000 keys not recognized	rdp	Mazda Truck Forum	1	08-04-2007 10:08 PM
After Market Bumpers	Tom Downey	Dodge Truck Forum	6	04-17-2007 05:51 AM
W.t. Bumpers	vickbo	Chevy Truck Forum	2	07-27-2006 10:00 PM