engine problems

hellbilly1112 · 12-27-2008, 06:25 PM

my 1997 nissan's engine just went and i was wondering how far back o forward in model years can i use for engines in my truck? i ask this because there are lots of 1991's around were i live i was wondering if the 2.4 liter V-4's out of them would fit my 1997? thanks, also if there is anyne if the vermont area who has a nissan truck who would be willing to sell or part out please let me know thanks again.....

nismo06 · 01-13-2009, 03:04 PM

yea they should fit

hellbilly1112 · 01-15-2009, 07:56 PM

good to know

gmctrucks · 01-16-2009, 12:43 PM

Where are you from?

stuvw2mny · 02-17-2009, 09:50 PM

Nissan 4 cylinder engines are in line engines, not V4s. Nissan switched to the KA24 engine in 1991, so such a swap into a 1997 might work. You will not have fun, though, because of different emissions requirements and equipment. You might have to use your 1997 intake and exhaust manifolds.

hellbilly1112 · 03-25-2009, 05:44 PM

ok thanks yeah i saw that mistake and realized that they are inlines..but thanks tho...

95nissan · 07-29-2009, 07:33 AM

yeah i bet you could use the block-head but thats it.

i know you can change out a 240sx with a pickup.

but a complete engine swap for a 97 from a 91?
their are some differences.

my 95 2.4 is different than a 91 2.4

good luck

lukasmcdukas · 07-29-2009, 09:45 AM

Quote:

Originally Posted by stuvw2mny

Nissan 4 cylinder engines are in line engines, not V4s. Nissan switched to the KA24 engine in 1991, so such a swap into a 1997 might work. You will not have fun, though, because of different emissions requirements and equipment. You might have to use your 1997 intake and exhaust manifolds.

glad you pointed that out.

bradrhale · 07-29-2009, 11:52 AM

12-27-2008, 07:25 PM to 03-25-2009, 06:44 PM to Today, 10:45 AM

are yall kidding me??

lukasmcdukas · 07-29-2009, 03:52 PM

ahhhh, i fell in the trap again. dang these old threads, someone should clean them up

12-27-2008, 06:25 PM	#1
hellbilly1112 Junior Member Join Date: Jul 2008 Posts: 6	engine problems my 1997 nissan's engine just went and i was wondering how far back o forward in model years can i use for engines in my truck? i ask this because there are lots of 1991's around were i live i was wondering if the 2.4 liter V-4's out of them would fit my 1997? thanks, also if there is anyne if the vermont area who has a nissan truck who would be willing to sell or part out please let me know thanks again.....

07-29-2009, 03:52 PM	#10
lukasmcdukas Senior Member Join Date: Nov 2008 Location: Kittery, Maine Posts: 574	ahhhh, i fell in the trap again. dang these old threads, someone should clean them up __________________ 97 Nissan Hardbody SE Kingcab (77k) 86 Yamaha Maxim X (48k)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Swap Problems...can You Help?	jltoyota	Toyota Truck Forum	2	07-19-2008 07:37 AM
7.4l(454) Problems	ryeja	Chevy Truck Forum	40	02-21-2008 08:28 PM
Engine misfire detected engine code HELP	Airforce wrench	Chevy Truck Forum	2	02-21-2008 08:13 PM
Read this if you have engine missing problems, IMPORTANT!!!	Sneakysportsman	Chevy Truck Forum	8	08-13-2007 09:55 PM
89 Pickup Engine Problems....Please Help	long90	Toyota Truck Forum	2	01-23-2007 08:25 PM

01-13-2009, 03:04 PM	#2
nismo06 Full Member Join Date: Dec 2008 Location: north carolina Posts: 28	yea they should fit

01-15-2009, 07:56 PM	#3
hellbilly1112 Junior Member Join Date: Jul 2008 Posts: 6	good to know

01-16-2009, 12:43 PM	#4
gmctrucks Senior Member Join Date: Nov 2006 Location: Houston,Texas Posts: 4,030	Where are you from?

02-17-2009, 09:50 PM	#5
stuvw2mny Full Member Join Date: Oct 2007 Posts: 15	Nissan 4 cylinder engines are in line engines, not V4s. Nissan switched to the KA24 engine in 1991, so such a swap into a 1997 might work. You will not have fun, though, because of different emissions requirements and equipment. You might have to use your 1997 intake and exhaust manifolds.

03-25-2009, 05:44 PM	#6
hellbilly1112 Junior Member Join Date: Jul 2008 Posts: 6	ok thanks yeah i saw that mistake and realized that they are inlines..but thanks tho...

07-29-2009, 07:33 AM	#7
95nissan Junior Member Join Date: Jul 2009 Posts: 7	yeah i bet you could use the block-head but thats it. i know you can change out a 240sx with a pickup. but a complete engine swap for a 97 from a 91? their are some differences. my 95 2.4 is different than a 91 2.4 good luck

07-29-2009, 11:52 AM	#9
bradrhale Senior Moderator Join Date: Apr 2006 Location: Texas Posts: 8,014	12-27-2008, 07:25 PM to 03-25-2009, 06:44 PM to Today, 10:45 AM are yall kidding me??