1969 Chevy CST-10 Mostly Complete Long Stepside

[chuckphillips]

I am selling this on e-bay, but have to option to close it early, I would hope to sell it to someone who has time to bring her back to life!

I will give the best description I can, but trust me, I am going to miss something.

I purchased this truck a couple years ago with the vision of transforming the truck from a fleetside long bed to a short bed, as time went on, I now have the parts to make it a Long Stepside.

I will give you a flavor of what is there and what is not, as far as I can tell that is.

The truck is really complete. The parts I feel will be needed are:

1. Pass. Fender, inside and out.
2. Power Steering pump, it may be here, but don't plan on it.
3. I think I got the rear drive shaft from a deal I made on the bed. Shown in one of the pictures.
4. Gauges, I can give you information on the guy who has the original, he took it in on trade for a new ones I was going to buy with tach.
5. Body and bed mounts
6. Nuts and bolts. Some are there, they tried to put them back in the hole during tear down, but plan on getting some.

What I know is there and good:
1. Drivers side fenders, in and out.
2. BBC 396, I believe original. Tore down and put back together with new gaskets and seals. I can not guarantee it is original or runs, but I see no reason why it would not. I personally tore the motor completely down, cleaned and reassembled with new seals and gaskets.
3. Long stepside bed, needs work.
4. Stepside fenders, need some work, not too bad though
5. Cab, not too bad at all, I welded in new lower fender support, needs cleaned up and painted.
6. All glass is good, the windshield is new and needs installed once the area is prepped
7. The original trany for this truck should have been a TH400 but for some reason someone put in a TH350.
8. Front bumper is not bad, not show quality though. the rear bumper will need some attention, but workable.

The fender and doors were worked on by me some. The had little rust, when I say little, I mean little. just the bottom edges from scooting around on the floor I think. I plug welded all side molding holes and smoothed with fiberglass bondo.

The bed fenders have some blemished but not bad at all.

The seat is here but would need recovered.

The core support needs a little cleaning up, small amount of rust.

I think the front grille and all is nice and not broken up, but come look.

This is a nice truck to start a nice project with.

It should go without saying, but I will say it anyways, THIS IS A AS-IS, WHERE IS DEAL. YOU MUST BRING A TRAILER TO PICK IT UP AND TAKE IT AWAY.

PLEASE DON'T SHOW UP AND START TO DEAL ON PARTS AND WHAT HAVE YOU.

Title? Here's the deal, I have it, I just never had it switched into my name yet. I am selling this truck as parts. If you want it with a title, contact me and make me an offer.

You are welcome to ask any questions you like, but please do it through e-mail, this way I have proof of what I said, I don't want any he said she said, fair for both of us.

chuckphillips@juno.com

You can find more pictures on my photobucket:

TruckAuction pictures by chuckphillips - Photobucket

[chuckphillips]

Ebay closed the other auction since I said I could end it at any time and selling elsewhere.

Here is the new one:

eBay Motors: 1969 Chevy Truck BBC 396 Short Long Step Side Stepside (item 140317604057 end time May-06-09 08:35:47 PDT)

[Lonesome7.3]

Still no worky.

[chuckphillips]

Finally got the ad to stay up for more than a day!

eBay Motors: 1969 Chevy truck fender bed BBC 396 TH350 TH400 Long 70 (item 140317893321 end time May-07-09 13:13:10 PDT)

[chuckphillips]

eBay Motors: 1969 Chevy truck fender bed BBC 396 TH350 TH400 Long 70 (item 140317893321 end time May-07-09 13:13:10 PDT)

[chuckphillips]

I could use a new gauge cluster.

Inner passenger Fender.

Need Bed and Body mounts.

[chuckphillips]

City on my Butt! All CASH offers considered.