Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: 10 bolt rear diff with 3:73 limited slip carrier

  1. #1
    Senior Member chevyguy's Avatar
    Join Date
    Sep 2005
    Location
    ALABAMA
    Posts
    4,088

    Arrow 10 bolt rear diff with 3:73 limited slip carrier

    Have complete rear 10 bolt with 3:73 gears and eaton limited slip carrier out of 96 suburban, Had 60k miles when pulled. Have IFS front carrier also with 4 wheel drive actuator. Converted to 1 ton gear with solid axle. Will part out all or sell whole. located in Coos bay oregon . Email nutjob@charter .net
    Window tint its for window, Not for tail lights. Don't be that guy .

  2. #2
    Senior Member will4831's Avatar
    Join Date
    Feb 2006
    Posts
    127
    i'd be interested in the limited slip if you want to (can?) take it out...
    '96 GMC 1500 Victory Red x-cab 4x4
    Programmed 350 crying for a rebuild
    '88 IROC-Z Camaro 5.0 5speed t-tops stock...not for long
    '93 Escort GT 1.8 DOHC 127hp 5speed.
    Daily Driver/Beater


  3. #3
    Senior Member chevyguy's Avatar
    Join Date
    Sep 2005
    Location
    ALABAMA
    Posts
    4,088
    I have a party interested in the whole seabag. Would rather not part, but It will get to that if I dont sell it soon. i will let you know
    Window tint its for window, Not for tail lights. Don't be that guy .

  4. #4
    Senior Member will4831's Avatar
    Join Date
    Feb 2006
    Posts
    127
    Thanks, CG
    '96 GMC 1500 Victory Red x-cab 4x4
    Programmed 350 crying for a rebuild
    '88 IROC-Z Camaro 5.0 5speed t-tops stock...not for long
    '93 Escort GT 1.8 DOHC 127hp 5speed.
    Daily Driver/Beater


  5. #5
    Senior Member chevyguy's Avatar
    Join Date
    Sep 2005
    Location
    ALABAMA
    Posts
    4,088
    Alright. Everyone wants a shipping quote on this. I am not about to drag this down to UPS everytime someone is interested. Might just pull the carrier and ring and pinion. Might be a better deal for someone. I think shipping would be too much anyway.
    Window tint its for window, Not for tail lights. Don't be that guy .

  6. #6
    Senior Member project88's Avatar
    Join Date
    Feb 2006
    Posts
    135
    my buddy seems to think that the carrier and ring, pinion is all i need with my axle housing, but i need a bigger housing right?? 1/2 ton with open diff..

  7. #7
    Senior Member chevyguy's Avatar
    Join Date
    Sep 2005
    Location
    ALABAMA
    Posts
    4,088
    What rear end do you currently have in the truck. If it is a 10 bolt then it should fit right in.
    Window tint its for window, Not for tail lights. Don't be that guy .

  8. #8
    Senior Member project88's Avatar
    Join Date
    Feb 2006
    Posts
    135
    no, just stock six bolt, i am interested, but shipping to me would be expensive, for everything, thanks alot though!!!

  9. #9
    Senior Member project88's Avatar
    Join Date
    Feb 2006
    Posts
    135
    just had a brain ****, 10 bolt wheel or 10 bolt inside the diff somewhere, stupid question i know, but i think i confused myself....i had a hard night....

  10. #10
    Senior Member chevyguy's Avatar
    Join Date
    Sep 2005
    Location
    ALABAMA
    Posts
    4,088
    10 bolt rear cover. Just count the bolts holding the rear diff cover on. It works well until you get to 12 bolt because their are several different ones with 9.5 and 10.5 ring and pinion
    Window tint its for window, Not for tail lights. Don't be that guy .

Page 1 of 2 12 LastLast

Similar Threads

  1. gm 10 bolt rear axle
    By RingtownJoe in forum Chevy Truck Forum
    Replies: 0
    Last Post: 10-15-2005, 02:44 PM
  2. rear diff.
    By vanhal in forum Chevy Truck Forum
    Replies: 0
    Last Post: 03-24-2005, 08:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •